Yamaha AW4416 Handbuch Ergänzung - Seite 13
Blättern Sie online oder laden Sie pdf Handbuch Ergänzung für Musikinstrument Yamaha AW4416 herunter. Yamaha AW4416 48 Seiten. Installing an internal hard disk
Auch für Yamaha AW4416: Zusatzhandbuch (1 seiten), Anleitung (34 seiten), Zusatzhandbuch (20 seiten), Handbuch (3 seiten)
Seite drucken
6
Move the cursor to the TRANSMIT button,
and press the [ENTER] key.
The bulk dump will begin. While the bulk dump
is occurring, a popup window will appear, indi-
cating the current state of progress.
Tip!
You can abort the bulk dump by pressing the [ENTER]
key while the popup window is displayed.
• If an error occurs during the bulk dump, try increas-
ing the INTERVAL setting to leave a longer pause
between the data blocks that are transmitted.
• The time required for executing the bulk dump will
depend on the category that is selected and on the
content of the data. Particularly in the case of auto-
mix, a significantly long time may be required
depending on the amount of data that is recorded.
7
To receive previously-stored bulk data,
press the [MIDI] key
key.
The MIDI screen MIDI Setup 1 page will appear.
8
Move the cursor to the BULK area RX
(Receive) button, and press the [ENTER]
key.
The RX button will be turned on, and the
AW4416 will be ready to receive bulk data.
9
Make sure that the transport of the
AW4416 is stopped, and transmit bulk data
from your MIDI sequencer.
When all bulk data has been received, the corre-
sponding settings and/or libraries will be
updated.
[Reference pages]
Details on the Bulk Dump page
[F1] (MIDI Setup 1)
P.31
Version 2.0 Manual Supplement
Newly added MIDI Remote func-
tion
The new MIDI Remote function lets you use faders 1–
16 and [ON] keys 1–16 to control a connected exter-
nal MIDI device.
About the MIDI Remote function
"MIDI Remote" is a function that lets you assign spe-
cific MIDI messages to faders 1–16 and [ON] keys 1–
16, so that these messages will be transmitted when
you operate the corresponding fader or [ON] key. The
following types of messages can be assigned.
Messages that can be assigned to faders
MIDI messages whose value changes in a range of 0–
127 can be assigned to faders. For example if you
assign control change #7 (Volume) to a fader and
specify a range of 0–127 as the control change value,
operating the fader will control the volume of a MIDI
tone generator.
Control change number 7
Value= 127
Value= 0
Messages that can be assigned to [ON] keys
MIDI messages whose value switches to 0 or 127 can
be assigned to [ON] keys. For if you assign control
change #64 (Hold) to an [ON] key and make settings
so that the value switches to either 0 or 127, turning
the [ON] key on (lit) will transmit control change #64
with a value of 127 (Hold On), and turning it off (dark)
will transmit control change #64 with a value of 0
(Hold Off).
Control change
number 64
(value=127)
Transmitted
ON
ON
Transmitted
Control change
number 64
(value=0)
Transmitted
ON
13