Yamaha Clavinova CLP-157 Benutzerhandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha Clavinova CLP-157 herunter. Yamaha Clavinova CLP-157 39 Seiten. Yamaha clavinova owner's manual

Seite drucken

Control Change ON/OFF

Normally the Clavinova will respond to MIDI control change data received from an external MIDI device or

keyboard, causing the selected Clavinova voice to be affected by pedal and other "control" settings received

from the controlling device. The Clavinova also transmits MIDI control change information when one of its

pedals are operated.

This function makes it possible to cancel control change data reception and transmission if you do not want

the Clavinova voices to be affected by control change data received from an external device or vice versa.

MIDI/

ANO 2

TRANSPOSE

PIANO 3

= Control Change OFF

PIANO 3

= Control Change ON

The Multi-Timbre Mode

CLAVINOVA

MIDI/

ANO 3

TONE

TRANSPOSE

CLAVINOVA

TONE

= Multi-Timbre Mode ON

CLAVINOVA

TONE

= Multi-Timbre Mode OFF

The MIDI Split & Left Local OFF Mode

In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal

way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha

DOU-10 Disk Orchestra Unit. In this mode the right-hand section of the keyboard is used to play an internal

Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator.

Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point," or the

key that divides the left- and right-hand sections of the keyboard can be set at any desired key.

AUX IN

MIDI OUT

Clavinova

Hold down the [MIDI/TRANSPOSE] button.

CLAVINOVA

PIANO 3

TONE

Press the [PIANO 3] voice selector. If the PIANO 3 LED is lit when

the [PIANO 3] voice selector is pressed, you have turned control

change reception/transmission OFF. If the PIANO 3 LED is not lit

when the [PIANO 3] voice selector is pressed, you have turned control

change reception/transmission ON.

Release the [MIDI/TRANSPOSE] button.

The Multi-Timbre mode is a special mode in which the Clavinova voices

can be independently controlled on different MIDI channel numbers by an

external MIDI device. The Multi-Timbre mode can be activated as follows:

Hold down the [MIDI/TRANSPOSE] button.

E. PIANO 1

Press the [CLAVINOVA TONE] voice selector. If the CLAVINOVA

TONE LED is lit when the [CLAVINOVA TONE] voice selector is

pressed, you have turned the Multi-Timbre mode ON. If the

CLAVINOVA TONE LED is not lit when the [CLAVINOVA TONE]

voice selector is pressed, you have turned the Multi-Timbre mode OFF.

Release the [MIDI/TRANSPOSE] button.

The MIDI split mode is useful if, for example, you want to play a piano

(Clavinova) voice with the right hand while playing a synthesizer bass line

OUT PUT

MIDI

or string section with the left hand.

When the MIDI split mode is activated, notes played on the left-hand

DOU-10

section are transmitted via the Clavinova MIDI OUT connector on MIDI

channel 2. Notes played on the right-hand section are transmitted on the

"basic channel" (i.e. the channel set using the MIDI channel selection func-

(Set to receive on

MIDI channel 2)

tion described previously).