Yamaha Clavinova CLP-625 Benutzerhandbuch - Seite 29
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha Clavinova CLP-625 herunter. Yamaha Clavinova CLP-625 39 Seiten.
Auch für Yamaha Clavinova CLP-625: Kurzbedienungsanleitung (2 seiten)
Seite drucken
Appendix
Troubleshooting
Problem
Power suddenly and unexpectedly turns off.
The instrument does not turn on.
A click or pop is heard when the power is
turned on or off.
Noise is heard from the speakers or
headphones.
Noise is heard from the instrument's speakers or
headphones when using the instrument with the
application on iPhone/iPad.
The overall volume is low, or no sound is heard.
Pedals do not function.
The damper pedal does not function as
expected.
Possible Cause and Solution
This is normal and the Auto Power Off function may have been activated
(page 12). If desired, disable the Auto Power Off function.
The plugs are not properly connected. Make sure that the DC plug is
securely inserted into the DC IN jack on the instrument, and that the AC
plug is securely inserted to the AC outlet (page 12).
This is normal when electrical current is being applied to the instrument.
The noise may be due to interference caused by the use of a mobile phone
in close proximity to this instrument. Turn off the mobile phone, or move it
further away from this instrument.
When you use the instrument along with the application on your iPhone/
iPad, we recommend that you set "Airplane Mode" to "ON" on your iPhone/
iPad in order to avoid noise caused by communication. While Bluetooth is
connected, setting "Airplane Mode" to "ON" disconnects Bluetooth;
however, the connection can be restored by reconnecting again.
The Master Volume is set too low. Set it to an appropriate level using the
[MASTER VOLUME] knob (page 12).
Make sure a pair of headphones or conversion adaptor is not connected to
the [PHONES] jack (page 13).
Make sure that Local Control is On. For details, refer to the "MIDI
Reference."
The pedal cord may not be securely connected to the [TO PEDAL] jack. Be
sure to insert the pedal cord all the way until the metal part of the cord plug
disappears from view (page 31).
The damper pedal was pressed when the power was turned on. This is not
a malfunction; release the pedal and press it again to reset the function.
29
CLP-625 Owner's Manual