Yamaha Clavinova CLP-920 Benutzerhandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha Clavinova CLP-920 herunter. Yamaha Clavinova CLP-920 32 Seiten. Yamaha clavinova owner's manual

Seite drucken

MIDI Data Format/MIDI-Datenformat/

Format des données MIDI/Formato de datos MIDI

If you're already very familiar with MIDI, or are using a

computer to control your music hardware with computer-

generated MIDI messages, the data provided in this section

can help you to control the Clavinova.

Falls Sie bereits mit MIDI vertraut sind oder einen Compu-

ter zur Erzeugung von MIDI-Steuermeldungen für die

Instrumente verwenden, können Sie sich zur Steuerung des

Clavinovas nach den im folgenden Abschnitt aufgeführten

Spezifikationen richten.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)

kk = Note number (Transmit: 0FH ~ 72H = Eb-1 ~ F#7 /

Receive: 00H ~ 7FH = C-2 ~ G8)*

vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv]

8nH = Note OFF event (n = channel number)

kk = Note number: 00H ~ 7FH = C-2 ~ G8

vv = Velocity

* If received value exceeds the supported range for the selected

voice, the note is adjusted by the necessary number of octaves.

2. CONTROL CHANGE

Data format: [BnH] -> [cc] -> [vv]

BnH = Control change (n = channel number)

cc = Control number

vv = Data Range

(1) Bank Select

ccH

Parameter

00H

Bank Select MSB 00H:Normal

20H

Bank Select LSB

Bank selection processing does not occur until receipt of next Pro-

gram Change message.

(2) Main Volume (reception only)

ccH

Parameter

07H

Volume MSB

(3) Expression

ccH

Parameter

0BH

Expression MSB

(4) Damper

ccH

Parameter

40H

Damper MSB

(5) Sostenuto

ccH

Parameter

42H

Sostenuto

(6) Soft Pedal

ccH

Parameter

43H

Soft Pedal

(7) Reverb Depth

ccH

Parameter

5BH

Reverb Depth

Adjusts the reverb send level.

3 MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)

cc = Control number

vv = Data Range

(1) All Sound Off

ccH

Parameter

78H

All Sound Off

Switches off all sound from the channel. Does not reset Note On and

Hold On conditions established by Channel Messages.

(2) Reset All Controllers

ccH

Parameter

79H

Reset All Controllers 00H

Resets controllers as follows.

Controller

Value

Expression

127 (max)

(reception only)

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H-3FH:off, 40H-7FH:on

Data Range (vvH)

00H-3FH:off, 40H-7FH:on

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H

Data Range (vvH)

Si vous êtes très familier avec l'interface MIDI ou si vous

utilisez un ordinateur pour commander votre matériel de

musique au moyen de messages MIDI générés par

ordinateur, les données suivantes vous seront utiles et vous

aideront à commander le Clavinova.

SI usted está ya familiarizado con MIDI, o si emplea una

computadora para controlar sus aparatos musicales con

mensajes MIDI generados por computadora, los datos propor-

cionados en esta sección le ayudarán a controlar la Clavinova.

Damper Pedal

0 (off)

Sostenuto

0 (off)

Soft Pedal

0 (off)

(3) Local Control (reception only)

ccH

Parameter

7AH

Local Control

(4) All Notes Off

ccH

Parameter

7BH

All Notes Off

Switches OFF all the notes that are currently ON on the specified

channel. Any notes being held by the damper pedal will continue to

sound until the pedal is released.

(5) Omni Off (reception only)

ccH

Parameter

7CH

Omni Off

Same processing as for All Notes Off.

(6) Omni On (reception only)

ccH

Parameter

7DH

Omni On

Same processing as for All Notes Off.

(7) Mono (reception only)

ccH

Parameter

7EH

Mono

Same processing as for All Sound Off.

(8) Poly (reception only)

ccH

Parameter

7FH

Poly

Same processing as for All Sound Off.

• When a voice bank MSB/LSB is received, the number is stored in

the internal buffer regardless of the received order, then the stored

value is used to select the appropriate voice when a program

change message is received.

• The Multi-timbre and Poly modes are always active. No change

occurs when OMNI ON, OMNI OFF, MONO, or POLY mode mes-

sages are received.

4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]

CnH = Program event (n = channel number)

ppH = Program change number

Program change number

Vioce

Bank MSB Bank LSB Program Change Number

GRAND PIANO

E.PIANO

CHURCH ORGAN

STRINGS

5. SYSTEM REALTIME MESSAGES

Active sensing

[FEH]

• Transmitted every 200 milliseconds.

• If a signal is not received via MIDI for more than 400 milliseconds,

the same processing will take place for All Sound Off, All Notes Off

and Reset All Controllers as when those signals are received.

• Caution: If an error occurs during MIDI reception, the Damper and Soft

effects for all channels are turned off and an All Note Off occurs.

6. SYSTEM EXCLUSIVE MESSAGES

(Universal System Exclusive)

(1) Universal Realtime Message

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->

[ll H] -> [mmH] -> [F7H]

Data Range (vvH)

00H (off), 7FH (on)

Data Range (vvH)

00H

Data Range (vvH)

00H

Data Range (vvH)

00H

Data Range (vvH)

00H

Data Range (vvH)

00H

112

CLP-920