Yamaha DTX500K Benutzerhandbuch - Seite 35

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha DTX500K herunter. Yamaha DTX500K 48 Seiten. Drum trigger module

Seite drucken

4-4.

Press the [SAVE/ENTER] button again. A prompt

appears asking you to conﬁrm the Store operation.

TRG~save~to~8

~Are~you~sure~?

4-5.

Press the [SAVE/ENTER] button once more to actu-

ally execute the Store operation.

* To cancel the Store operation, press any button

except for the [SAVE/ENTER] and [SHIFT] buttons.

(When "Are you sure?" appears in the display, the jog

dial will also cancel the operation.)

The following display appears after the Store opera-

tion is complete.

~~~Completed!

NOTICE

• Never attempt to turn off the power while the message

now storing...

" is shown. All Trigger Setup data

may be lost.

Explanations of Each Display Page

The following explanations cover the available parameters in the

pages TRG1 through TRG8. To save the edited data, refer to step

4 on page 34.

TRG1

Trigger Setup Select

TRG1~~~ååååååååå

1~:XP~Med~~~~~~‚

[Range]

1–11

Selects the Trigger Setup Type (p. 12)

TRG2

Type (Pad Type)

TRG2~

ƒsnare~~0%

"Type=SN-1~~~~~‚

Sets the type of pad that is connected to the input jack assigned in

the upper half of the display ([1SNARE] in the example shown

above).

* Values set in [TRG3 Gain, MVl (Mininimum Velocity)] (p. 36)

and [TRG5 RejTime (Self Rejection Time)] (p. 36) will auto-

matically changed to the proper values for the pad type you

set here.

NOTE

• If you want to replace some of the pads from your drum set,

refer to the operation on page 34 (Trigger Setup Edit) after

the above setting is done, to make sure that the settings (such

as sensitivity) are appropriate for each pad.

Pad types are deﬁned as follows.

KICK

KP125W/125/80S/80/65/60

SN-1

XP100T/100SD/120T/120SD

(mainly used as a snare pad)

SN-2

TP100/120SD (mainly used as a snare pad)

SN-3

TP65S/65 (mainly used as a snare pad)

TM-1

XP100T/100SD/120T/120SD

(mainly used as a tom pad)

TM-2

TP100/120SD(mainly used as a tom pad)

TM-3

TP65S/65(mainly used as a tom pad)

CY-1

PCY155/150S/135 *1

CY-2

PCY155/150S/135 *1

CY-3

PCY155/150S/135 *1

CY-4

PCY130SC

CY-5

PCY130S/130

CY-6

PCY65S

HH-1

RHH135

HH-2

RHH130

DT Snare DT series drum trigger (for a snare drum)

DT HiTom DT series drum trigger (for a small toms)

8 Trigger Setup Edit

DTX500 Owner's Manual