Yamaha PSR-S910 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Musikinstrument Yamaha PSR-S910 herunter. Yamaha PSR-S910 32 Seiten. Internet connection guide (version 1.10)
Auch für Yamaha PSR-S910: Benutzerhandbuch (20 seiten), Handbuch zum Anschluss (22 seiten), Handbuch zum Anschluss (22 seiten)

Seite drucken

Installing the driver on Windows 2000

1 Start the computer and use the "Administrator" account

to log on to Windows 2000.

2 Select [Start] → [Settings] → [Control Panel] → [System]

→ [Hardware] → [Driver Signing] → [File signature

veriﬁcation], and check the radio button to the left of

"Ignore–Install all ﬁles, regardless of ﬁle signature" and

click [OK].

After completing the driver installation, make sure to restore the

original setting if necessary.

3 Insert the included CD-ROM into the CD-ROM drive.

The Start window will appear automatically.

4 First, make sure the instrument is turned off, then use a USB

cable to connect the USB connector of the computer to the USB

TO HOST connector of the instrument. When the instrument is

turned on, the computer automatically displays the "Found

New Hardware Wizard." Click [Next].

(The Wizard window may take a while to display on some computers.)

If the Wizard window is not displayed automatically, refer to

"Troubleshooting."

Refer to the Owner's Manual of the instrument to connect the

instrument to the computer.

5 Check the radio button to the left of "Search for a suitable

driver for my device (Recommended) ," then click [Next].

6 Check the "CD-ROM drives" box and uncheck all other

items. Click [Next].

The system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the "USBdrv2k_" folder of the CD-

ROM drive (such as D:\USBdrv2k_\) and continue the installation.

7 Click [Next].

If the Wizard panel informs you that "The software you are about

to install does not contain a Microsoft digital signature," click [Yes].

8 When the installation is complete, the system displays

"Completing the Found New Hardware Wizard." Click [Finish].

(The Wizard window may take a while to display on some computers.)

9 Restart the computer.

The USB-MIDI driver installation is complete.

Installing the driver on Windows Vista

Start the computer and use the "Administrator" account

to log on to Windows Vista.

Insert the included CD-ROM into the CD-ROM drive.

The AutoPlay window will appear.

Click [Run Start.exe].

The Start window will appear automatically.

First, make sure the instrument is turned off, then use a

USB cable to connect the USB connector of the computer

to the USB TO HOST connector of the instrument. When

the instrument is turned on, the computer automatically

displays the "Found New Hardware" window. Click

"Locate and install driver software (recommended)".

If the window is not displayed automatically, refer to

"Troubleshooting." (Some computers may take a while to

display the window.)

Refer to the Owner's Manual of the instrument to connect the

instrument to the computer.

If the "User Account Control" window appears, click [Continue].

If a message allowing Windows to search online for

driver software appears, click "Don't search online."

If a message prompting you to insert the disk that came

with your device appears, click [Next].

The system starts the installation.

If the "Windows Security" window appears, conﬁrm this software

is authored by Yamaha Corporation then click [Install].

When the installation is complete, the system displays

the message "The software for this device has been

successfully installed," then click [Close].

(Some computers may take a while to display the window.)

The USB-MIDI driver installation is complete.

Accessory CD-ROM for Windows Installation Guide