Yamaha S90 ES Kurzanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Kurzanleitung für Musikinstrument Yamaha S90 ES herunter. Yamaha S90 ES 11 Seiten. Half damper function and damper resonance effect
Auch für Yamaha S90 ES: Schnellstart-Handbuch (4 seiten)
Seite drucken
element 2 will be affected, and the others are
unaffected. (See example assignment below).
•
Real-time Control over Insertion Effects:
Other possible destinations include real-time
control over the powerful DUAL INSERTION
EFFECTS that can be applied to a VOICE.
Refer to the Effect Parameter List (page 27-
35) for an idea of potential here. When
targeting a control destination if an effect
parameter can be real-time controlled you will
see an abbreviation of the parameter name
appear in the Control Set. If not controllable
in real-time, the parameter will be designated
with a "P" number, as in "INS2P10". For
example,
call
up
PRE1:118
[Or:16+8+5&1/3];
uses the Dual Rotor Speaker 2 algorithm for
INSERTION B. You will find data about this
effect on the bottom right of page 30 of the
DATA LIST booklet. Navigate to its Control
Set1/2;
•
Press [EDIT]
•
Press [COMMON]
•
Press [F4] CTL SET
•
Press [SF1] Set1/2;
This
Voice
has
"INSB:EfSpCtl" which translates to "Insertion
Effect B: Effect Speed Control". It has two
speeds (like a Leslie) Slow and Fast. This
Control Set is using the Mod wheel to switch
between
Slow/Fast
parameters of the Dual Rotor Speaker 2
algorithm are assignable for real-time control.
There are 16 possible parameters in the
processor. "Speed Control" is listed as MIDI
Parameter Number 16. MIDI Parameters 10
and 15 are unavailable for real-time control
assignment. If you attempt to select them you
will see "INSB:INS2P10" and "INSB:INS2P15"
instead
of
a
parameter
meaning
they
Parameter Number 10: (typically Wet/Dry
Balance) is totally unavailable because of
phase cancellation possibilities - it is not even
listed; and Number 15 "Microphone L-R angle"
is the angle of the modeled stereo microphone
on the Leslie cabinet...simply not a parameter
you would move in real-time. Mic angle is a
"set and forget" parameter. Parameters that
are unavailable typically have no musical or
the
B3
Organ
sound
This
Voice
the
destination
set
speeds.
Most
of
abbreviation
are
unavailable.
(MIDI
practical use. If you want to see and tweak
this effect algorithm press [F6]: EFFECT/
[SF3]:INSB
•
DEPTH The setting here must be set with
care and some thought. The range here is
from –64 ~ 0 ~ +63. How the S90 ES
responds to a setting will depend on which
parameter and which controller is selected.
(See below some example assignments). A
Depth setting of 0 defeats all other settings in
the
Controller
meaningless.
number the more it increases the range of
control. Negative value settings reverse the
effective direction of the controller. You will
have
to
assignments. ...More on this in a minute.
How the assignment of controls works
Example Assignment: In this example we deal
with controlling VOLUME via controllers within a
S90 ES sample-based Voice. This can be tricky,
but this example should make clear how it works.
--Let's say you want to control the total Volume
of the Voice with the Modulation Wheel. MIDI
control change message #001 is the Modulation
Wheel. The modulation wheel can be assigned to
control
all
synthesizer, not just vibrato (Pitch Modulation
Depth). But for our example let's see what
happens when you attempt to assign the MW to
control overall volume. For our experiment let's
initialize a voice. This way we are not inheriting
to
values from a preprogrammed Controller Set.
From Voice mode:
•
Press the following buttons:
•
Press [JOB]
the
•
Press [F1] INIT
•
Press [ENTER]
•
Press [INC/YES] to execute.
This will create an INIT VOICE with just a piano
wave in it.
•
Press [EDIT]
Let's select a synth wave. Navigate to the
–
OSCILLATOR WAVE page:
•
Press Program button [1] to drop to the
Element level of editing. (Notice the
Inverse video 'E' and the 'EL1' on the top
line – denoting the Voice has been edited
but not yet stored and we are editing
Element 1.)
•
Press [F1] OSC
•
Press [SF1] WAVE
•
Select sample wave #0612 [Wv:UniBass]
3
Set
and
renders
In
general,
the
be
logical
here
when
manner
of
parameters
them
higher
the
making
within
a