Yamaha Silent Bass SLB-100 Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha Silent Bass SLB-100 herunter. Yamaha Silent Bass SLB-100 17 Seiten. Yamaha silent bass owner's manual
Auch für Yamaha Silent Bass SLB-100: Benutzerhandbuch (18 seiten)
Seite drucken
The Silent Bass can be operated with either battery or AC power. Always turn
the power switch on the rear panel OFF before making AC power connections
or replacing the battery.
■ Using the Battery
1
Open the battery case located on the backside of the instru-
ment by pulling the tab labeled "OPEN" toward you, then
open the battery compartment cover.
2
Insert the supplied battery (6F22:S-006P) into the battery com-
partment. Take careful note of the polarity markings (+/-) as
shown in the illustration when inserting the battery.
3
Close the battery compartment cover and push the battery case
all the way back into the instrument body.
* For customers in the Netherlands
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
When the battery is low, the lamp will dim and the sound may become distorted or noisy.
When these symptoms occur, please take note of the following precautions and replace the battery.
• When replacing the battery, please purchase a replacement battery that is the same type as the sup-
plied battery (make sure the size and dimensions, plus the terminal design are the same). Depending
upon the manufacturer, designs may differ slightly. A different type of battery may be difficult to insert
into the battery case and may result in damaging the instrument. Also, even if the battery can be
inserted, its use may result in fire, poor operation, etc. due to poor contact with the battery terminals.
• Always follow the +/– signs when inserting the battery. Improper insertion may result in fire.
• To prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove
the battery from the unit when it is not going to be used for an extended period of time.
■ Supplying AC Power
AC adaptor is optional, please purchase the optional power adaptor PA-3B.
1
Plug the adaptor's DC output cable into the Silent Bass's DC IN 12V jack located on the back of the
instrument, making sure the plug is firmly inserted into the jack.
2
Plug the AC adaptor into a convenient wall AC power socket.
• Battery power is automatically disconnected when the AC adaptor is connected.
• When the AC adaptor is used, the batteries may leak. To prevent leakage we recommend that you remove
the batteries from the instrument.
• When using an AC adaptor, make sure you use only the appointed compatible adaptor. The use of an
incompatible adaptor may result in damage to the instrument or cause fire, etc. Please use with caution.
Power Supply
6F22 (S-006P)
9V battery
battery
compartment
cover
battery
compartment
13