Yamaha SILENT Bass SLB300 PRO Benutzerhandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha SILENT Bass SLB300 PRO herunter. Yamaha SILENT Bass SLB300 PRO 24 Seiten.

Seite drucken

 Preparing the Power Supply (How to Replace Batteries)

The SILENT Bass

Before installing or removing the batteries, remove the cable from the output jack.

On the backside of the instrument, push

down the battery case's latch in the direction

of the "OPEN" arrow to remove the battery

case.

NOTICE

• When removing the battery case, tilt the instru-

ment body at an angle to prevent the battery

case from flying out.

Insert the batteries into the case. Referring to

the illustration, make sure the batteries are

placed in the case with the polarity (+/-) prop-

erly aligned.

Push in the battery case all the way until you

hear a click.

 When to Replace the Batteries

• When the batteries are running low, the status display LED flashes in red. Promptly replace the

batteries.

• With nickel hydride batteries, the discharge properties may cause the power to turn off before the

LED flashes in red.

Be careful of the following when replacing the batteries.

• Battery shapes (battery terminals and external shapes, etc.) vary depending

on the battery manufacturer. Inserting a battery with a shape different from

the battery case may damage the instrument or the like. Even if the batteries

fit in, poor contact with the terminals can cause a fire.

• Always follow the polarity signs (+/-) when inserting batteries. Improper

insertion can cause a fire.

• If not using the instrument for a long period of time, remove the batteries

from the instrument. Failure to do so can cause battery drainage or damage

to the instrument due to battery leakage.

uses batteries for its power source.

Battery case

Latch

SLB300 PRO SLB300 Owner's Manual

AA batteries

(alkaline or

nickel hydride)