Yamaha YTS-475 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha YTS-475 herunter. Yamaha YTS-475 13 Seiten. Saxophone

Assembly

Before Assembling the Instrument

Since the walls of the saxophone's body are thin, it is important to remember not to put too

much pressure on the instrument in any particular position when holding it. Also, be careful not

to damage the instrument by using excessive force during assembly or while handling.

■ Assembling the Instrument

Attach the mouthpiece to the neck.

Hold the mouthpiece and push it about 3/4

of the way onto the neck cork using a slow

twisting motion.

* If it is difﬁcult to attach the mouthpiece, apply

a little cork grease on the neck cork. Be careful

not to use excessive force, which may damage

the instrument.

Attach the neck to the body.

Loosen the neck screw, hold the neck then

insert it directly into the neck receiver using a

slow twisting motion.

* If it is difﬁcult to insert into the neck receiver,

apply a little cork grease on the neck's joint sec-

tion.

After aligning the neck, tighten the neck screw

to secure it.

Moisten the end of the reed in your mouth (or

in some water).

Neck Screw