Yamaha YVD10 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha YVD10 herunter. Yamaha YVD10 11 Seiten. Vibraphone variable-speed driver
Auch für Yamaha YVD10: Benutzerhandbuch (11 seiten)

Seite drucken

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even

death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions

include, but are not limited to, the following:

Do not open

• This product contains no user-serviceable parts. Do not

open the units or attempt to disassemble or modify the

internal components in any way. If they should appear to

be malfunctioning, discontinue use immediately and

have it inspected by qualified Yamaha service

personnel.

• Repairs or part replacement should not be attempted

unless instructions are provided in the manual.

Handling

• Do not use or store the units in any of the following

locations. Doing so can cause fire or electrical shock.

- In places subject to high temperatures (near a heating

device or in direct sunlight, etc.).

- In places subject to low temperatures.

- In places where the units may be exposed to moisture

(bathroom, on wet floors, etc.) and excessive humidity.

- In places where the units may be exposed to rain.

- In places with excessive dust.

- In places subject to vibrations.

• Never insert or remove an electric plug with wet hands.

Improper grounding can result in electrical shock.

• Never put foreign objects (combustible objects, coins,

wire, etc.) or liquids (water, juice, etc.) in the units.

Doing so can cause fire or electrical shock.

PRECAUTIONS

DMI-7

Power supply/AC adaptor

• Only use the voltage specified as correct for the

instrument. The required voltage is printed on the name

plate of the instrument.

• Do not place the power cord of the AC adaptor near heat

sources such as heaters or radiators. Also, do not

excessively bend or otherwise damage the cord, or

place heavy objects on it.

• Use the specified AC adaptor only. Using the wrong AC

adaptor can result in damage to the units or overheating.

• Check the electric plug periodically and remove any dirt

or dust which may have accumulated on it.

• Do not connect the controller unit to an electrical outlet

using a multiple-connector. Doing so can result in

possibly cause overheating in the outlet.

• When removing the electric plug from the unit or an

outlet, always hold the plug itself and not the cord.

Pulling by the cord can damage it.

• Turn off the power switch and remove the electric plug

from the outlet when the units are not to be used for

extended periods of time, or during electrical storms.

If you notice any abnormality

• When one of the following problems occur, immediately

turn off the power switch and disconnect the electric

plug of the AC adaptor from the outlet. Then have the

device inspected by Yamaha service personnel.

- If the AC adapter or power cord becomes damaged.

- If foreign objects or liquids have gotten into a unit.

- If a unit gets wet (rain, etc.).

- If a unit operates abnormally or is broken.

1/2

YVD10 Owner's Manual