aldes CW3000 Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Fan aldes CW3000 herunter. aldes CW3000 7 Seiten.
Seite drucken
READ AND SAVE THESE INSTRUCTIONS
CAUTION
Always turn off electrical power and verify that
the unit is electrically safe before performing any
maintenance on the unit. This unit contains
high-voltage electrical components.
CAUTION
This unit has moving parts. All repairs and
maintenance should be performed by a qualified
technician to avoid serious injuries.
IMPORTANT
•
Always turn off electrical power and verify that
the unit is electrically safe before performing
any maintenance on the unit.
•
No modifications shall be made to the unit
under any circumstances. Warranty will be
immediately voided.
•
Do not use this device to exhaust steam,
inflammable or explosive gases.
•
Electrical connections shall be made by a
qualified electrician.
•
Airflows shall be as per the approved submittal
in order for the ventilation system to function
properly and the warranty be honorred.
•
Installation shall be completed in conformance
with local construction and safety codes.
•
All drawings, photos and diagrams contained
in this document are for reference purposes
only. Units may differ.
•
Carnes reserves the right to modify unit and its
components without prior warning.
ADVANCED SERIES
CE and CH MODELS
HEAT & ENERGY
RECOVERY VENTILATORS
WA R R A N T Y
YEARS
2
WARRANTY
Aldes products are guaranteed to be defect-free for a
period of (2) years from the date of purchase.
•
Labor not included.
WARRANTY DOES NOT APPLY IF:
•
Modifications were made by or for the client.
•
Product was poorly installed.
•
Maintenance, cleaning and lubrification were not
executed in accordance with recommendations made
by Aldes.
WARRANTY EXCLUSIONS
•
All installation fees and labor relating to product
repairs.
•
All fees related to a loss of operations, merchandise,
inventory or equipment due to a defective Aldes
product.
Unpacking Your Unit
Remove the protective wrapping from the unit including the
foam protection at each corners. Extra care should taken to not
scratch the painted surfaces. Appropriately dispose of materials
accordingly to local and/or project specific requirement.
Inspecting Your Unit
Visually inspect the unit to ensure that no sheet metal has been
dented or scratched. Verify that the air intake and exaust hoods
have not been damaged in transport.
Warning:
Do not remove the shipping attachments until the
unit has been moved to its final location.
IOM