Yamaha PLG100-VH Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Elektronische Tastatur Yamaha PLG100-VH herunter. Yamaha PLG100-VH 30 Seiten. Vocal harmony effect processor plug-in board
Auch für Yamaha PLG100-VH: Benutzerhandbuch (32 seiten), Handbuch "Erste Schritte (6 seiten)

Seite drucken

Setting Up

Setting up with XG Plug-in System "mother" device

Microphone Setup........................................................

z Connect a microphone to the A/D INPUT jack.

x Select Part "A1," then select the "Mic" preset (bank #000, program

#002).

MIDI Setup.....................................................................

If you wish to control the Harmony effect from a MIDI keyboard or with song data played

on a MIDI sequencer, make the following MIDI-related settings.

• MIDI is used only when the Harmony Type is set to

Chromatic

z Set up the MIDI keyboard or sequencer.

Connect the MIDI OUT of the MIDI device to MIDI IN of the tone generator/sound

card. Set the device's MIDI transmit channel to 1 (or to the same channel you'll be

setting in step #2 below).

x Set the

Harmony

This determines the MIDI receive channel for the Harmony effect, and should be

set to the same value as set for the MIDI device in step #1 above.

c Assign the Harmony effect to the desired Part (with the

v Disable all other Parts set to the same channel as the Harmony Channel.

You'll want to make sure that the connected keyboard or sequencer doesn't sound

any of the instrument Parts of the tone generator/sound card. If one or more Parts

are set to the same MIDI channel (as set in step #2 above), change the MIDI chan-

nel setting of the Part(s), mute them, or set the volume of each Part to 0.

b Set the Harmony Type to Vocoder or Chordal.

Easy Setup....................................................................

You can quickly and easily make many of the above settings directly from the VH Effect

Editor, with the

Setting up with Modular Synthesis Plug-in System "mother" device

z Connect a microphone to the A/D INPUT jack of the "mother" device.

x Make the appropriate settings on the "mother" device — ensuring that

the signal received via the A/D INPUT jack is properly sent to the

PLG100-VH.

(For details, refer to the owner's manual of your particular "mother"

device.)

(MU series, etc.)

types, Harmony is unaffected by a connected MIDI device.

Channel.

Easy Setup

dialog box.

(S80, MOTIF series, etc.)

Vocoder

or Chordal. For the

Detune

and

Part

parameter).