Yamaha HTR-4064 Handbuch zur einfachen Einrichtung - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch zur einfachen Einrichtung für Empfänger Yamaha HTR-4064 herunter. Yamaha HTR-4064 8 Seiten. Setup guide
Seite drucken
5
Optimizing the speaker settings automatically (YPAO)
The YPAO microphone (supplied) detects the status of speaker connections and the distance between the speakers and
the listening position, and adjusts the volume balance and the tone settings automatically (YPAO: Yamaha Parametric
room Acoustic Optimizer).
• The volume level is fixed to 0 dB while measuring.
• The test tone is output at a high volume while measuring. Be
careful that the test tone does not frighten any small children.
• The room must be quiet while measuring.
• Do not connect headphones to the unit.
• YPAO measurement does not work correctly if any obstacles are
in the room. Move everything out of the room or place it in the
corners while measuring. It takes approximately three minutes
to finish this measurement.
Preparation before using YPAO
(If necessary) Select the language displayed on the TV screen with
"Language" in the "Setup" menu referring to "Owner's Manual" (p.71).
The unit (front)
• Turn on the subwoofer
and set its volume to
approximately half.
And, set the cross-
over frequency (if
available) to
maximum.
CROSSOVER/
VOLUME
HIGH CUT
MIN
MAX
MIN
MAX
• When a subwoofer
with the automatic
standby function (turn
off automatically
during no signals
input) is used, disable
the function before
going to the next step.
Set the YPAO microphone at the height
of your ears. We recommend that you
use equipment that allows you to adjust
the height (such as a tripod) as a
microphone stand. If you are using a
tripod, use the tripod screws to fix the
microphone in place.
6
MOVIE
MOVIE
RETURN
MENU
MENU
MODE
MODE
YPAO microphone
listening position
The height of
your ears
CODE SET
CODE SET
SOURCE
SOURCE
RECEIVER
RECEIVER
HDMI
HDMI
1
1
2
2
3
3
4
4
[ A ]
[ A ]
V- V V AUX
V-AUX
A A
AV
AV
1
1
2
2
3
3
4
4
DOCK
DOCK
5
5
6
6
AUDIO
AUDIO
TUNER
TUNER
USB
USB
FM
FM
AM
AM
PRESET
PRESET
TUNING
TUNING
INFO
INFO
MEMORY
MEMORY
SUR. DECODE
SUR. DECODE
STRAIGHT
STRAIGHT
MUSIC
MUSIC
SLEEP
SLEEP
ENHANCER
ENHANCER
DIRECT
DIRECT
SCENE
SCENE
BD
BD
TV
TV
CD
CD
RADIO
RADIO
DVD
DVD
SETUP
OPTION
OPTION
SETUP
Cursor keys
ENTER
ENTER
VOLUME
VOLUME
RETURN
DISPLAY
DISPLAY A A
TOP
TOP
POP-UP
POP-UP
MUTE
MUTE
MENU
MENU
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
0
10
10
ENT
ENT
TV
TV
INPUT
INPUT
TV VOL
TV VOL
TV CH
TV CH
MUTE
MUTE
1
Connect YPAO microphone to the YPAO
MIC jack on the front panel.
The following image is displayed on the TV screen.
• To cancel the measurement, disconnect the YPAO
microphone before measuring starts.
2
Confirm that "Start" is selected, and then
press SETUP.
The measurement starts in ten seconds.
After the measurement is complete, the following
image is displayed on the TV screen.
• When "W-1:Out of Phase" appears, refer to 'When "W-1:
Out of Phase" appears' on the next page.
• If a message such as an error message and warning
appears, refer to "Error messages" and "Warning
messages" in the "Owner's Manual."