Yamaha HTR-5920 Benutzerhandbuch - Seite 25

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Yamaha HTR-5920 herunter. Yamaha HTR-5920 45 Seiten. Digital home theater system av receiver
Auch für Yamaha HTR-5920: Service-Handbuch (38 seiten)

Seite drucken

Selecting input modes

This unit comes with 2 types of input jacks. Do the

following to select the type of input signals you want to

use.

Press INPUT l / h on the front panel

repeatedly (or one of the input selector

buttons on the remote control) to select

"DVD" or "DTV/CBL" as the input source.

INPUT

Front panel

Press INPUT MODE on the front panel

repeatedly to select the desired input mode.

INPUT MODE

AUTO

Automatically selects input signals in

the following order:

1) Digital signals

2) Analog signals

DTS

Selects only digital signals encoded in

DTS. If no DTS signals are input, no

sound is output.

ANALOG

Selects only analog signals. If no

analog signals are input, no sound is

output.

We recommend setting the input mode to "AUTO" in most cases.

Notes

• When playing a DTS-CD/LD, be sure to set the input mode to

DTS.

• Depending on the player, DTS decoding may not be performed

correctly.

Connect headphones to the PHONES jack.

Note

Multi-channel signals (except the LFE channel) are down-mixed

to stereo and output from the headphones.

You can adjust the frequency response levels of your front

left and right speakers.

Press TONE CONTROL on the front panel repeatedly to

MD/CD-R

TUNER

select "BASS" or "TREBLE", then press BASS/TREBLE

+/– on the front panel repeatedly to adjust the

DVD

DTV/CBL

VCR

V-AUX

corresponding frequency response level.

Remote control

• Select "BASS" to adjust the low frequency response

• Select "TREBLE" to adjust the high frequency

Note

If you increase or decrease the high-frequency or low-frequency

sound to an extreme level, the tonal quality of the surround

speakers may not match that of the front left and right speakers.

Press MUTE on the remote control. The MUTE indicator

flashes in the front panel display.

Press MUTE again or press VOLUME +/– on the remote

control to resume the audio output. The MUTE indicator

disappears from the front panel display.

You can combine a video image from a video source with

sound from an audio source. For example, you can enjoy

listening to classical music while viewing beautiful

scenery from the video source on the video monitor.

Use the input selector buttons on the remote control to

select a video source and then select an audio source.

Listening with headphones

Adjusting the frequency response levels

TONE CONTROL

level.

response level.

Muting the sound

MUTE

Playing video sources in the

background

MD/CD-R

TUNER

DVD

DTV/CBL

VCR

PLAYBACK

BASS/TREBLE

V-AUX