Yamaha RP-U200 Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Yamaha RP-U200 herunter. Yamaha RP-U200 33 Seiten.
Seite drucken
BASIC OPERATION
Playing a source
This section explains how to turn on this unit and select
input sources. If any external audio equipment is
connected to this unit, turn it on first.
PC
3
AUX1
AUX2
TUNER
VIRTUAL
5.I
CH
DIGITAL
USB PCM
D. DSP
PROLOGIC FM AM ST
VOL
DSP
P-SET
2, 5
1
1
Turn on this unit.
or
Front panel
The message "Hello" appears for a few seconds, and this
unit returns to the state in which it was last used (e.g., the
input source that was selected when this unit was turned off
is selected).
2
Decrease the volume to minimum (MIN).
or
Front panel
3
Select an input source by using the input selector
keys.
The corresponding indicator on the front panel lights up.
PC
AUX1
or
AUX2
TUNER
Front panel
Refer to the explanation on the right side for details about
using the input selector keys.
POWER
1
PC
3
AUX1
AUX2
TUNER
MEMORY
PRESET
MANUAL
HALL
JAZZ
CHURCH
GAME
MOVIE
LIVE
/ DTS
TEST
ON/OFF
SURROUND
A
B
C
2, 5
MUTE
VOLUME
POWER
Remote control
VOLUME
Remote control
PC
AUX1
AUX2
TUNER
Remote control
4
Start the selected input source.
Refer to "Listening to an FM broadcast" on pages 14–18
about how to tune in to a desired station.
5
Adjust the volume to the desired level.
or
Front panel
6
As you prefer, use a sound field program.
Refer to page 11 for details about the sound field programs.
About the input selector keys
Each of the input selector keys selects the following input signals.
PC:
Press the PC key repeatedly to select the PC inputs:
"USB", "PC_DIGT" and "PC_ANLG". PC_DIGT selects
the DIGITAL PC COAX IN or DIGITAL PC OPT IN, and
PC_ANLG selects the ANALOG PC IN.
Note: The DIGITAL PC OPT IN has priority over the
DIGITAL PC COAX IN, so if you connect to both inputs,
the signal received at the DIGITAL PC OPT IN is used.
VOL
VOL
AUX1:
Press the AUX1 key repeatedly to select the inputs:
"AUX1_DG" and "AUX1_AN". AUX1_DG selects the
equipment connected to the DIGITAL AUX 1 OPT IN, and
AUX1_AN selects the equipment connected to the
ANALOG AUX 1 IN connector as the input source.
VOL
AUX2:
Press the AUX2 key to select
the equipment connected to
the ANALOG AUX 2 IN
connectors as the input
source.
TUNER:
Press the TUNER key to select the built-in FM tuner as
the input source.
* When the TUNER key is pressed, "TUNER" appears
first on the display, and soon it changes to the display
of a frequency or a preset station.
FM
ST
VOL
BASIC OPERATION
VOLUME
Remote control
VOL
VOL
VOL
FM
ST
9
E-
VOL