Yamaha RX-V567 Update - Seite 3

Blättern Sie online oder laden Sie pdf Update für Empfänger Yamaha RX-V567 herunter. Yamaha RX-V567 5 Seiten. Firmware update version f018 (including htr-4063/htr-5063)
Auch für Yamaha RX-V567: Hook-Up Diagram (2 seiten), Kurzreferenz-Handbuch (9 seiten), Kurzreferenz-Handbuch (9 seiten)

Seite drucken
Yamaha RX-V567 Update
STANDBY/ON

TONE CONTROL

STEP3 ENTER FIRMWARE UPDATE MODE
Plug the AC power cable of the AV receiver.
Press and hold the [STRAIGHT] button on the front panel and keep it pressed
while you press the [STANDBY/ON] button. Once the front panel displays
"Advance Setup", release the [STRAIGHT] button. Then, press and hold the
[INFO] button for about 3 seconds until front panel displays "CDDA Upgrader".
Now your AV receiver is ready for firmware update.

STEP4 START FIRMWARE UPDATE

Turn on the BD/DVD/CD player.
Load the Firmware Update CD (Audio CD) and press [PLAY] button on the
BD/DVD/CD player.
"Found Header" will appear on the AV receiver for few seconds. Then, the
firmware update starts.
"Found Header" appears within 10 seconds from starting update disc playback.
In case display doesn't change after 10 seconds, retry the update process again
from the beginning or check requirements for the update disc and connection.
See

IN CASE OF ERROR

While update is in progress,
DO NOT interrupt the AV receiver by pressing any buttons or
switching off the power.
When completed, "Update Success", "Please..." and "Power off!!" are
displayed repeatedly. Turn off the power of AV receiver.
Stop the BD/DVD/CD player, remove update disc and power off.
Firmware Update Procedure for RX-V467/RX-V567
INFO
for details.
Page.3 of 5
STRAIGHT