Yamaha AX-596 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Yamaha AX-596 herunter. Yamaha AX-596 19 Seiten. Stereo amplifier
Auch für Yamaha AX-596: Produktkatalog (44 seiten), Service-Handbuch (26 seiten), Service-Handbuch (26 seiten)

Seite drucken

CAUTION: Read this before operating your unit.

To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

Install this unit in a cool, dry, clean place – away from

windows, heat sources, sources of excessive vibration,

dust, moisture and cold. Avoid sources of humming

(transformers, motors). To prevent fire or electrical

shock, do not expose the unit to rain or water.

Never open the cabinet. If something drops into the

set, contact your dealer.

Do not use force on switches, controls or connection

wires. When moving the unit, first disconnect the

power plug and the wires connected to other

equipments. Never pull the wires themselves.

The openings on the unit cover assure proper

ventilation of the unit. If these openings are

obstructed, the temperature inside the unit will rise

rapidly; therefore, avoid placing objects against these

openings. Install the unit in a well-ventilated area to

prevent fire or damage.

Europe, U.K. and China models only

Be sure to allow a space of at least 20 cm behind, 20

cm on both sides and 30 cm above the top panel of the

unit to prevent fire or damage.

The voltage used must be the same as that specified

on this unit. Using this unit with a higher voltage than

specified is dangerous and may result in fire or other

accidents. YAMAHA will not be held responsible for

any damage resulting from use of this unit with a

voltage other than specified.

Always set the VOLUME control to "

the audio source play. Increase the volume gradually

to an appropriate level after the play has been started.

Do not attempt to clean the unit with chemical solvents

as this might damage the finish. Use a clean, dry

cloth.

Be sure to read the "TROUBLESHOOTING" section

regarding common operating errors before concluding

that the unit is faulty.

10.

When not planning to use this unit for a long period

(ie., vacation, etc.), disconnect the AC power plug from

the wall outlet.

11.

To prevent lightning damage, disconnect the AC power

plug when there is an electric storm.

12.

Grounding or polarization – Precautions should be

taken so that the grounding or polarization of an

appliance is not defeated.

E-

13.

14.

When this unit is turned off by pressing the STANDBY/ON

switch on the front panel or the remote control, the

STANDBY indicator on the front panel lights up. This state

is called the standby mode. In this mode, this unit is

designed to consume a small amount of power. This

unit's power supply is completely cut off from the AC line

only when the POWER switch on the front panel is set in

the OFF position or the AC power cord is disconnected.

For Canadian Customers

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

WARNING

Do not change the IMPEDANCE SELECTOR switch

setting while the power to this unit is on, otherwise

this unit may be damaged.

If this unit fails to turn on when the POWER switch is

" before starting

pressed:

The IMPEDANCE SELECTOR switch may not be set to

either end. If so, set the switch to either end when this

unit's power supply is completely cut off.

Do not connect any audio equipment to the AC outlet

on the rear panel if the equipment requires more power

than the outlet is rated to provide.

VOLTAGE SELECTOR

(China and General models only)

The voltage selector on the rear panel of this unit

must be set for your local main voltage BEFORE

plugging into the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

SPEAKERS

CAUTION

SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

A OR B : 4 MIN. /SPEAKER

A B : 8 MIN. /SPEAKER

IMPEDANCE SELECTOR

(U.S.A. model)

MAINS

AC OUTLETS

SWITCHED

I20V 60Hz

l00W MAX. TOTAL

IMPEDANCE SELECTOR

SET BEFORE POWER ON

A OR B : 6 MIN. /SPEAKER

A B : I2 MIN. /SPEAKER