Yamaha KMA-500 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Yamaha KMA-500 herunter. Yamaha KMA-500 23 Seiten. Digital karaoke mixing amplifier

Seite drucken

■ Names of parts and their functions

1 INPUT

INPUT is not available in default setting.

To activate INPUT, refer to "Input mode" on page 14.

2 KEY CONTROL (

Transpose the key of the played music.

3 MIC (

Adjust the overall volume of the microphones.

4 ECHO (

Adjust the amount of echo.

5 MUSIC (

Adjust the music volume.

* The LED on the corresponding control on the front panel blinks

during adjustment.

6 PRESET (1/2/3)

Recall saved preset settings for MIC volume/ECHO

amount/MUSIC volume/ECHO MODE.

To save current settings of the above, press the desired

button (PRESET 1, 2, 3 or KEY CONTROL on the front

panel) for 3 seconds. Pressing KEY CONTROL saves

settings to PRESET 1. When save is completed, " " on

the KEY CONTROL blinks once. You can save up to 3

presets (PRESET 1/2/3) on this unit. Refer to "Power ON

recall" on page 14.

7 ECHO MODE

Select NORMAL, WIDE or SPACIOUS (KMA-700 only)

echo.

REMOTE CONTROL

/ /

)

■ Preparing the remote control

The remote control comes with the battery already

installed. Before using the remote control for the very first

time, pull out the plastic tab, as shown.

For information on replacing the battery, refer to next

section.

■ Operation of remote control

1. Remote control

The distance between the remote control and the remote

sensor of this unit should be within 6 m (20'). Be sure to

aim the remote control directly at the remote sensor on the

front panel.

2. Loading a battery

The life of the battery used in the remote control is about

half a year under normal use. Remove the battery if the

remote control is not used for an extended period. When

the battery becomes weak, replace with a new CR2025

battery.

To replace the battery:

1. Using a small screwdriver, carefully slide out the

battery holder.

2. Remove the expired battery, and place the new

CR2025 battery onto the battery holder with the + side

facing up.

3. Slide the battery holder into the remote control, and

push it so that it clicks shut.

+ side up

Plastic tab

Within 6 m

(20')

30°