Yamaha TX5n Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Yamaha TX5n herunter. Yamaha TX5n 24 Seiten. Txn series
Auch für Yamaha TX5n: Spezifikationen (4 seiten), Benutzerhandbuch (24 seiten), Benutzerhandbuch (24 seiten), Benutzerhandbuch (24 seiten), Benutzerhandbuch (24 seiten)

Seite drucken
Yamaha TX5n Benutzerhandbuch
Audio I/O Settings

Bridge Mode

The amplifier will operate as a monaural high-power amp,
with the input signal of channel A (analog) or channel 1
(digital) as the source.
5-way binding post connectors
–
+
Total speaker
impedance:
4–16Ω
Speakon connectors
Total speaker
impedance:
4–16Ω
• Each of 5-way binding post connectors and Speakon
NOTE
connectors are internally parallel-connected. When
using both connectors simultaneously, total speaker
impedance of each connector must be 8–32 Ω.
Mode Setting
Select the power amp mode according to the type of connec-
tions you've made.
1.
Press the [HOME] button to access the HOME
screen, and press the third function button from
the left (MENU) to access the MENU screen.
12
TX6n/5n/4n Owner's Manual
Analog input
Digital input
Analog input
Digital input
2.
Use the encoder A to move the cursor (the blink-
ing frame) to "General," and press the [ENTER]
button.
3.
Use the function buttons (PREV/NEXT) to access
Stereo/Bridge/Parallel screen.
4.
Use the encoder B to select the desired mode, and
press the [ENTER] button to confirm.

Gain Setting

Set the amplifier gain.
1.
Follow the steps 1 and 2 of the above "Mode Set-
ting" to select "MENU" → "General."
2.
Use the function buttons (PREV/NEXT) to access
the Sensitivity/Amp Gain screen.
3.
Use encoder A to move the cursor to Amp Gain or
Sensitivity, and encoder B to edit the parameter
value.
4.
If the parameter value is blinking, press the
[ENTER] button to confirm the value.
• Refer to the TX6n/5n/4n Reference Manual for details
NOTE
on the gain.
Word Clock Setting
If you want to input or output digital audio signals, you must
check the word clock settings as necessary. Refer to the
TX6n/5n/4n Reference Manual for details on how to check
these settings. The factory setting is "Auto Scan Mode: ON."