Yamaha XMV4280 Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Yamaha XMV4280 herunter. Yamaha XMV4280 42 Seiten. Power amplifier
Auch für Yamaha XMV4280: Benutzerhandbuch (38 seiten), Benutzerhandbuch (43 seiten), Benutzerhandbuch (39 seiten)

Seite drucken

Operations

Front Panel Operations

This chapter describes the operations you can perform from the

front panel.

NOTE

If you modify the parameter settings, do not turn the power

switch OFF for at least one second. Otherwise, the changes to

the settings may be lost.



Basic Operations

To do this...

Checking the current operat-

ing mode

Changing the operating mode

Turning Mute on/off

Temporarily disabling or re-

enabling front panel lock

*1: "X+Y" means "operate Y while operating X." For example, "[SELECT] A + encoder" means that you should hold down the [SELECT] A

button and operate the encoder.

Operation

[FUNCTION]

[FUNCTION] + encoder

[MUTE] + [SELECT] (of the chan-

nel to be muted)

[FUNCTION] + [SELECT] A

Description

While you hold down the [FUNCTION] button, the current oper-

ating mode will be shown in the display. The modes are indi-

cated as follows.

Indication

ATT

Attenuation setting

POL

Polarity setting

Turn the high pass filter on/off and

HPF

change the cutoff frequency

SRC

Analog/digital input selection

SIG

[SIGNAL] indicator display selection

DIS

Digital input sensitivity selection

Use the encoder to change the operating mode.

When you release the [FUNCTION] button, the operating mode

shown at that time will be selected; the display will show the

parameter value.

If a certain period of time elapses without any operation being

performed, the operating mode will be switched back to "Atten-

uation setting."

When muting turns on, the [MUTE] indicator of the selected

channel will lit.

When muting turns off, the [MUTE] indicator will go unlit.

When front panel lock is temporarily disabled, the [PANEL

LOCK] indicator will flash.

When front panel lock is enabled, the [PANEL LOCK] indicator

will lit. While the front panel is locked, "LC" is shown in the dis-

play.

Even if front panel lock is temporarily disabled, it will be

relocked when one minute passes without any operation being

performed or when the power is turned off.

XMV4280/XMV4140/XMV4280-D/XMV4140-D Owner's Manual

Operating mode