Yamaha ATS-1010 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem Yamaha ATS-1010 herunter. Yamaha ATS-1010 19 Seiten. Front surround system
Auch für Yamaha ATS-1010: Benutzerhandbuch (20 seiten)
Seite drucken
Installation:
illustrated examples
Example
1
Example 2
Example 3
Example
1: Unit beneath
TV
Example
2: Unit without
stand beneath
TV (_ P. 9)
Example
3: Wall mounting
Ir#6Ig-N
•
Do not place
the unit on/under
any other
components
such
as BD player
in a pile. The vibration
of the unit may cause
system
failure,
etc. in other
components.
•
Depending
on your installation
environment,
connections
to external
components
such
as TV or BD player
can be
done
befk_re installing
the unit.
We recommend
that you
temporarily
place
and arrange
all components
in order
to
decide
which
procedure
is best done
first.
•
When
you clean
the unit, use a clean,
dry and snl: cloth
(such
as cloth f_>r glasses).
•
Do not touch
the grille
on the frnnt
and bottom
nf the unit.
•
Place
the unit away
from
your TV more
than 51) mm (2")
sn as not tn damage
ynur TV
with real" panel
nf the unit.
The brackets
on the rear nf the unit are removable.
1
Attach the supplied mounting template
on a wall and mark the holes of the
mounting template.
Tapes or
thum tac's
k
/
Mark
^
2
Remove the mounting template and then
install the commercially
available screws
and the supplied spacers at the marks.
!................................................................................................
"Spacer (5 mm (1/_4_2)---T-_
7 to 9 mm
-_
-_ 4 mm (#81
(114" to 318")j__,_
._-._:_,
.....
,'_/,_J-
L_
Minimum
2 to 4 mm
20 mm (3/4")
(1/16" to 3/16")
3
Hang the unit on the screws using the
brackets on the rear of the unit.
You can attach the unit to a wall using the brackets
on the
rear of the unit.
When
installing
the unit on a wall, all
installation
work must be performed
by a
qualified
contractor
or dealer.
The customer
must never attempt
to perform
this installation
work.
Improper
or inadequate
installation
could cause
the unit to fall, resulting
in
personal
injury.
• Do not attach
the unit to a wall
that is made
of weak
materials
such as plaster
nr veneered
woods.
Doing
so may
cause
the unit to f:dl.
• Use commercially
available
screws
that
can support
the
weight
nf the installation.
• Make
sure you use specified
screws
to attach the unit. Using
clamps
ntber than specified
screws,
such as short screws,
nails,
or two-sided
tape, may cause
the unit tn lhll.
• When
connecting
the unit, fix the cables
in place where
they
will not become
loose. If your loot or hand
accidentally
gets
caught
on a loose
cable, the unit may lhll.
• Alter
attaching
the unit,
check
that the unit is fixed
securely.
Yamaha
will bear
no responsibility
li)r any
accidents
caused
by improper
installations.
3 En