Yamaha ATS-930 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem Yamaha ATS-930 herunter. Yamaha ATS-930 17 Seiten. Front

Seite drucken

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

• To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

• Install this unit in a well ventilated, cool, dry, clean

place - away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold. For proper

ventilation, allow the following minimum

clearances.

Top: 10 cm (4 in), Rear: 10 cm (4 in), Sides: 10 cm

(4 in)

• Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

• Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this

unit in an environment with high humidity (i.e. a

room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal

injury.

• Avoid installing this unit where foreign objects

may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the top

of this unit, do not place:

− Other components, as they may cause damage

and/or discoloration on the surface of this unit.

− Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

− Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

• Do not cover this unit with a newspaper,

tablecloth, curtain, etc. in order not to obstruct heat

radiation. If the temperature inside this unit rises, it

may cause fire, damage to this unit, and/or

personal injury.

• Do not plug in this unit to a wall outlet until all

connections are complete.

• Do not operate this unit upside-down. It may

overheat, possibly causing damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

• Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. Yamaha will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

• To prevent damage by lightning, keep the power

cable and outdoor antennas disconnected from a

wall outlet or the unit during a lightning storm.

• Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

• When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

• Be sure to read the "Troubleshooting" section on

common operating errors before concluding that

this unit is faulty.

• Before moving this unit, press

to set this unit in

standby mode, and disconnect the power supply

cable from the wall outlet.

• Condensation will form when the surrounding

temperature changes suddenly. Disconnect the

power supply cable from the outlet, then leave the

unit alone.

• Install this unit near the wall outlet and where the

AC power plug can be reached easily.

• The batteries shall not be exposed to excessive

heat such as sunshine, fire or like.

• Secure placement or installation is the owner's

responsibility. Yamaha shall not be liable for any

accident caused by improper placement or

installation of speakers.

Notes on remote controls and batteries

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following places:

− places of high humidity, such as near a bath

− places of high temperatures, such as near a

heater or a stove

− places of extremely low temperatures

− dusty places

• Do not expose the remote control sensor of this

unit to direct sunlight or lighting such as inverted

fluorescent lamps.

• If the batteries grow old, the effective operation

range of the remote control decreases

considerably. If this happens, replace the batteries

with two new ones as soon as possible.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read

the packaging carefully as these different types of

batteries may have the same shape and color.

• Exhausted batteries may leak. If the batteries have

leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into

contact with clothing, etc. Clean the battery

compartment thoroughly before installing new

batteries.

• Do not throw away batteries with general house

waste. Dispose of them correctly in accordance

with your local regulations.

• Keep batteries away from children. If a battery is

accidentally swallowed, contact your doctor

immediately.

• When not planning to use the remote control for

long periods of time, remove the batteries from the

remote control.

• Do not charge or disassemble the supplied

batteries.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if you turn off this unit by

. In this

state, this unit is designed to consume a very

small quantity of power.

(Power key)

Turns on the power of this unit or sets it to the

standby mode.

FOR U.K. CUSTOMERS

If the socket outlets in the home are not suitable for

the plug supplied with this appliance, it should be cut

off and an appropriate 3 pin plug fitted. For details,

refer to the instructions described below.

NOTE

The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is

hazardous if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K.

MODEL

IMPORTANT

THE WIRES IN THE MAINS LEAD ARE

COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the

earth terminal of the three pin plug.