Directechs Directed 403.HYUNDAI10 v2.11 Installationshandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge Directechs Directed 403.HYUNDAI10 v2.11 herunter. Directechs Directed 403.HYUNDAI10 v2.11 19 Seiten. Db3 2020 hyundai santa fe (smart key)

Directechs Directed 403.HYUNDAI10 v2.11 Installationshandbuch
Quick Reference Guide (customer copy)
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there are
3 possible ways you can send commands to your vehicle, using the:
• Factory remote.
• Aftermarket remote.
• Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3 times quickly
on your factory remote.
Vehicle takeover with Get In and Go
Important! Vehicle takeover is not available for the 2021-22 Hyundai Elantra Hybrid (Smart Key) and the
2022 Hyundai Sonata Hybrid (Smart Key).
Close the vehicle doors, hood and trunk, then press the
1
Remote Start button on the transmitter to start the vehicle.*
Press the Unlock button on the factory or aftermarket
2
remote.*
Complete the following steps within 45 seconds or the vehicle will shut down.
Enter the vehicle, while making sure the factory remote is
3
inside with you.
Important: Depending on your vehicle's trim level, you
are required to do one of the following steps:
Depress the brake pedal for a minimum of 3 seconds
4
then put the car in gear and drive off.
OR
Press the PTS button twice. Depress the brake pedal
for a minimum of 3 seconds then put the car in gear and
drive off.
* Icon and remote appearance may differ depending on the model purchased.
18
403.HYUNDAI10 2.11 2020 Hyundai Santa Fe (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Get In and Go
Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start
(PTS) equipped vehicle, once it has been remote started.
Typically, users would have to remote start their vehicle, then get inside and press the PTS button
to perform a takeover. There is therefore a physical action required to drive away. With Get In
and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to
do is put the gear in drive and drive off.
Pit stop/idle mode
Important! For the 2021-22 Hyundai Elantra Hybrid (Smart Key), you must follow the second option at Step 2.
Stop the vehicle in a safe parking spot and put the gear in
1
Park (P).
Important: Follow the option that has been checked off
by your technician:
Press Remote
Start button*
Press the Remote Start button on the transmitter.*
Press Unlock on
The parking lights will flash once to indicate the vehicle is
either remote*
2
now in Pit Stop Mode.
Press the Remote Start button on the transmitter and
then press the PTS button once.*
14:36
The parking lights will flash once to indicate the vehicle is
Enter vehicle
with remote
now in Pit Stop Mode.
Exit the vehicle with the factory remote in hand (it is safe to
leave the engine running).
Ready to
drive off
Notes:
OR
3
Ready to
drive off
Important!
when returning to the vehicle, the engine will shut down as
soon as a door is opened.
* Icon and remote appearance may differ depending on the model purchased.
14:36
14:36
OR
• We recommend that you always lock the doors
of your vehicle when leaving it unattended.
2021-22 Hyundai Elantra Hybrid (Smart Key):
Put
gear in
Park
&
Parking lights flash x1
Press Remote
Start button*
OR
&
&
Parking lights flash x1
Press Remote
Start button*
14:36
Exit vehicle
with remote