Clark 6462312 Handbuch für Betrieb und Wartung - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Säge Clark 6462312 herunter. Clark 6462312 17 Seiten. 185mm, 1200w circular saw
Seite drucken
POWER TOOL SAFETY WARNINGS
WORK AREA
1. Keep the work area clean and well lit. Cluttered and dark areas invite
accidents.
2. DO NOT operate this saw in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. The saw may create sparks which may
ignite the dust or fumes.
3. Keep children and bystanders away while operating this saw. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
1. The saw plug must match the outlet. NEVER modify the plug in any way. DO
NOT use adaptor plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce the risk of electric shock.
2. DO NOT expose the saw to rain or wet conditions. Water entering the saw
will increase the risk of electric shock.
3. DO NOT abuse the cable. NEVER use it for carrying, pulling or unplugging
the saw. Keep the cable away from heat, oil, sharp edges or moving parts.
Damaged or entangled cables increase the risk of electric shock.
4. When operating the saw outdoors, use an extension cable suitable for
outdoor use. Use of a cable suitable for outdoor use reduces the risk of
electric shock.
5. If operating the saw in a damp location is unavoidable, use a residual
current device (RCD) protected supply.
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when
operating this saw. DO NOT use this saw while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating this saw may result in personal injury.
2. Use safety equipment. ALWAYS wear eye protection. Safety equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
3. Avoid accidental starting. Ensure the switch is in the off position before
plugging in. Carrying this saw with your finger on the switch or plugging in
invites accidents.
4. Remove any wrench before turning the saw on. A wrench left attached to
a rotating part may result in personal injury.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6