Caliber RCD110 Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Auto-Empfänger Caliber RCD110 herunter. Caliber RCD110 18 Seiten. Car cd/mp3 player / rds receiver with usb interface, sd interface
Seite drucken
5. BASIC OPERATIONS
1) PANEL OPEN BUTTON ( OPEN )
Press this button to fold down the front panel.
6) POWER ON/OFF BUTTON (
press POWER/MUTE button or any other button on the front of the radio (except
Open / Eject) to turn the unit on. And Long press POWER /MUTEbutton again to turn the
unit off.
6) MUTE BUTTON (MUTE)
Short press the MUTE button momentarily to mute the audio volume, and "Mute" will flash
in the display. Press the MUTE button again to restore volume to the previous setting.
2) ENCODER VOLUME KNOB
Turn this knob to adjust desired volume level.
11) DISPLAY BUTTON( DISP )
Press this button briefly, the LCD will display the clock for about 2 seconds, then return to
previous display mode.
Clock Adjustment
Under clock display mode, press DISP button until the LCD flashes, press Tuning Up Button to
adjust hour and Tuning Down Button to adjust minute.
Press this button to view Clock, Programme Type (PTY), and Frequency of the station in listening.
DUAL COLOR ILLUMINATION BUTTON (DISP)
Press DISP button more than 3 seconds to change the LCD and illumination color from blue
to red and vice versa.
7) MODE BUTTON (MODE)
Press this button to select different mode , sequence as follow:
A) Tuner mode (Radio)
B) CDP / MP3 (only if a CD or MP3 disc is inserted)
C) USB (only if a USB drive is inserted)
D) SD (Only if a SD card is inserted))
E) CDC-CD Changer mode (optional, only if this unit is equipped with this features)
F) AUX IN (optional, only if this unit with this features)
MODE PRIORITY
Whenever a USB or SD is being inserted, unit will automatically switch to USB or SD mode,
does not matter the unit is currently in what mode.
When in USB or SD mode, if the USB or SD is being removed, unit will automatically switch to
radio mode.
12) AUX-IN JACK ON FRONT PANEL
Connect the external signal to AUX in jack located at the
front of the panel , then press Mode button to select Aux
mode. Press Mode Button again to cancel Aux Mode and
return to previous mode.
RESET BUTTON
The RESET button is located on the main unit (as shown on the diagram). To press it vertically
with a ballpoint pen or metal object will activate it. The reset button is to be activated for the
following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
Note: If press RESET button, the unit still cannot function normally, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the control panel.
)
E - 6
AUX IN
FRONT CABINET
LEFT TRACK
RIGHT TRACK
GROUND
AUX IN