Clark Synthesis AW339 All-Weather Pro Installationshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installationshandbuch für Messwertaufnehmer Clark Synthesis AW339 All-Weather Pro herunter. Clark Synthesis AW339 All-Weather Pro 20 Seiten.
Seite drucken
Installation Type: T-Nut
Requires initial access to the top of the material to
insert the T-nut, which installs flush to the surface.
(Drill a 7/16" hole for the T-nut).
Minimum 3-1/2" vertical space required, including
1/2" clearance between the Transducer and the
T-Nut
3/4"-thick
mounting
surface
Flat Washer
Lock Washer
Transducer Lead Wire
www.clarksynthesis.com
floor.
Drill 7/16" hole
Jam Nut (up)
3/8"-16
Threaded Stud
Jam Nut (down)
Washers
Jam Nuts
Installation: Overview
Installation Type: Hex Bolt
For use with metal, plastic, or other mounting surfaces
no thicker than 1/4". Requires access to the top of
the mounting surface both to install the bolt and to
tighten it.
Minimum 3-1/4" vertical space required, including
1/2" clearance between the Transducer and the
Maximum
1/4"-thick mounting
NEVER TIGHTEN
surface
BY TURNING THE
Transducer. MAKE
SURE TO TIGHTEN
THE JAM NUT
AGAINST THE
Transducer'S BRASS
NUT
floor.
3/8"-16
Hex Bolt
Flat Washer
Lock Washer
Jam Nut (up)
Jam Nut (down)
Transducer Lead Wire
Flat Washer
Lock Washer
Jam Nuts
Tactile Sound Transducers
Drill 7/16" hole
7