Directed Xpresskit DBALL2 Installationshandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge Directed Xpresskit DBALL2 herunter. Directed Xpresskit DBALL2 18 Seiten. Ford5 remote start ready (rsr) installation
Auch für Directed Xpresskit DBALL2: Installationshandbuch (12 seiten), Installationshandbuch (19 seiten), Installationshandbuch (18 seiten), Handbuch (14 seiten), Installationshandbuch (13 seiten), Installationshandbuch (14 seiten), Installationshandbuch (19 seiten), Installationshandbuch (16 seiten), Installationshandbuch (20 seiten), Installationshandbuch (15 seiten), Handbuch für Installation und Kurzanleitung (16 seiten), Installationshandbuch (16 seiten), Installationshandbuch (18 seiten), Installationshandbuch (16 seiten), Handbuch (19 seiten), Installationshandbuch (11 seiten), Installationshandbuch (10 seiten)

Seite drucken
Directed Xpresskit DBALL2 Installationshandbuch

Quick Reference Guide

DBALL2-HYUNDAI9 Remote Start Ready (RSR) Installation
Vehicle Takeover
Press the remote start button on the transmitter to
1
start the vehicle.*
Press the Unlock button on the factory
2
or aftermarket remote.*
3
Enter the vehicle, while making sure the
factory remote is inside with you.
4
Press the PTS button twice to turn the
ignition ON.
Press the brake pedal, put the car
5
in gear and drive off.
* Your aftermarket remote may differ from the model shown in the illustrations.
Press
remote start
button*
Press Unlock
OR
button on
either remote*
Enter vehicle
with Smart Key
ENGINE
2X
PUSH
START
STOP
Ready to
drive off
Pit Stop Mode
The Pit Stop Mode feature is practical when you need to stop and run an errand,
but wish to keep the engine running.
Stop the vehicle in a safe parking spot
1
and put the gear in Park (P).
2
Press the button to remote start the vehicle.*
It is now safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the doors
of your vehicle when leaving it unattended.
* Your aftermarket remote may differ from the model shown in the illustrations.
Parking Light Error Codes
The parking lights on your vehicle will flash a specific number of times 3 seconds
following an unscheduled shutdown or failure to start. Each flashing pattern is
described below.
Flashes
Diagnostic
1
Runtime expired.
2
Over-rev shutdown.
3
Low/No RPM.
4
Transmitter shutdown.
5
Brake shutdown.
6
Hood shutdown/Remote start safety override switch is ON*.
7
Remote start safety override switch is ON*.
* If the vehicle hood status is supported through data, it will also report a 7 flash
safety override code.
P
&
Stop & put vehicle in Park (P)
Press
remote start
button*
Exit vehicle with
Smart Key
© 2016 Directed. All rights reserved.