Clarke 3400771 Gebrauchsanweisung - Seite 5
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Clarke 3400771 herunter. Clarke 3400771 17 Seiten. Plastic stapler/welder kit
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when
operating a power tool. DO NOT use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in personal injury.
2. DO NOT overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
3. Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
GENERAL POWER TOOL USE AND CARE
1. DO NOT force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
2. DO NOT use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
3. Store idle power tools out of the reach of children and DO NOT allow
persons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
4. Use the power tool, accessories etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
STAPLER/WELDER USE AND CARE
1. Make sure to unplug the power cable when you leave the device.
2. ALWAYS ensure this device is kept out of children's reach.
3. The staples used with this device are made of special materials, not
ordinary steel wire. When the staples are used up, please contact your
CLARKE dealer, otherwise any malfunction caused by the use of staples of
other materials will not be covered by the warranty.
4. Please wear gloves in operation to prevent burns and wear protective
glasses to protect your eyes from flying staple ends if end cutting pliers are
used
5. Wear protective glasses and dust mask during the any sanding operations
when finishing off the repair.
6. The product is not suitable for pipeline products that require waterproof
and sealing requirements for conveying liquids or gases.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5