Directed Directechs DB3 Installationshandbuch - Seite 5

Seite drucken

Directed Directechs DB3 Installationshandbuch

Wiring diagram

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram (

Clutch Pedal

(+) Clutch: Black/Red, pin 2

Manual Transmission Only

D2D Port

(-) Ground

(-) Hood

(+) Starter Output

(+) Accessory Output

(+) Ignition Output

(AC) Tach Input

(+) 12V Input

(+) Parking Lights Output

(-) Lock Output

Connect to vehicle only

if ignition controlled

door locks is activated.

ETACS/ECU

(front view - at driver kick panel)

C-311

403.MIT3 2.11 2011 Mitsubishi Lancer Evolution

Ignition Connector

(white conn. left side of steering column)

(+) Ignition: White, pin 2

Automatic Transmission Only

(+) Starter: Orange or Lt.Blue, pin 5

(+) Accessory: Lt. Green, pin 6

C-313

(brown conn. at ECU)

(-) Driver Door Trigger:

Yellow, pin 16

C-309

(black conn. at ECU)

(+) 12V:

White, pin 1

Immobilizer Connector

(black and white conn.,

right side of steering column)

MS CAN Low:

MS CAN High:

Yellow or

Lt. Green or

Black/Blue, pin 10

White/Blue, pin 11

HS CAN High: Tan/Black: 3

MS CAN High: Orange/Green: 5

MS CAN Low: Orange/Brown: 6

(-) Auto Headlamp Shutoff Output: Green/Black: 2

(AC) Tach Output: Violet/White: 5

6 Amp

diodes

(+) Parking Lights:

Brown, pin 13

C-311

(white conn. at ECU)

OBDII Diagnostic

(connector side view)

HS CAN High:

Yellow/Green or

Pink, pin 6

HS CAN Low:

Violet or White

pin 14

HS CAN Low: Tan: 4

(+) Parking Lights:

Yellow, pin 10

XKD2D65