Clarke 7614051 Betriebs- und Wartungsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Elektrowerkzeug Clarke 7614051 herunter. Clarke 7614051 12 Seiten. 15 tonne shop press
Seite drucken
ASSEMBLY
During assembly, you will need assistance with some steps, do not take
unnecessary risks.
1.
Fit both base supports (15) to the
upright beams (7) using two
M12x25 bolts (12), two M12 nuts
(1) and two 12mm washers (3).
See Fig. 1.
2.
Fit two leg braces to each side as
shown in Fig. 3 and secure in place
using M12x25 bolts (12), M12 nuts
(1) and 12mm washers (3).
Please pay attention to the way the leg
braces have been fitted in Fig.2.
For additional stability, the press should be bolted to the ground.
You should drill through the base supports and use suitable bolts and washers
(not supplied) to secure the press to the workshop floor.
Base Supports
Leg Brace
4
Fig. 1
Fig. 2
Leg Brace