ALDI 54731 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Bohrer ALDI 54731 herunter. ALDI 54731 16 Seiten. 24v lithium-ion cordless drill with hammer action & 2 x batteries

Seite drucken

General safety warnings

b. Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and must

be repaired.

c. Disconnect the plug from the power source and/or the battery pack from

the power tool before making any adjustments, changing accessories,

or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool's operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work

to be performed. Use of the power tool for operations different from those

intended could result in a hazardous situation.

5. Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger

that is suitable for one type of battery pack may create a risk of fire when used

with another battery pack.

b) Use power tools only with specifically designated battery packs.

Use of any other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects,

like paper clips, coins, keys, nails, screws or other small metal objects,

that can make a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

4. Power tool use and care

a. Do not force the power tools. Use the correct power tool for your

General safety warnings

application. The correct power tool will do the job better and safer at

the rate for which it was designed.

a. Do not use the power tool if the switch does not turn it "on" and

"off" . Any power tool that cannot be controlled with the switch is

d) Under abusive conditions, liquid may be ejected from the battery; avoid

dangerous and must be repaired.

contact. If contact accidentally occurs, flush with water. If liquid contacts

a. Disconnect the plug from the power source and/or the battery

eyes, additionally seek medical help. Liquid ejected from the battery may

pack from the power tool before making any adjustments,

cause irritation or burns.

changing accessories, or storing power tools. Such preventive

6. Service

safety measures reduce the risk of starting the power tool accidentally.

a. Have your power tool serviced by a qualified repair person using

a. Store idle power tools out of the reach of children and do not

only identical replacement parts. This will ensure that the safety of

allow persons unfamiliar with the power tool or these instructions

the power tool is maintained.

to operate the power tool. Power tools are dangerous in the hands of

7. General safety information for battery-powered drill/drivers.

untrained users.

Drill safety warnings:

a. Maintain power tools with care. Check for misalignment or binding

Wear ear protectors when impact drilling. Exposure to noise can

of moving parts, breakage of parts and any other condition that may

cause hearing loss.

affect the power tool's operation. If damaged, have the power tool

Use auxiliary handle(s), if supplied with the tool. Loss of control can

repaired before use. Many accidents are caused by poorly maintained

cause personal injury.

power tools.

Hold power tool by insulated gripping surfaces, when performing

a. Keep cutting tools sharp and clean. Properly maintained cutting

an operation where the cutting accessory may contact hidden

tools with sharp cutting edges are less likely to bind and are easier

wiring. Cutting accessory contacting a "live" wire may make exposed

to control.

metal parts of the power tool "live" and could give the operator an

a. Use the power tool, accessories and tool bits etc. in accordance

electric shock.

with these instructions, taking into account the working

Hold power tool by insulated gripping surfaces, when performing

conditions and the work to be performed. Use of the power tool for

an operation where the fastener may contact hidden wiring.

operations different from those intended could result in a hazardous

Fasteners contacting a "live" wire may make exposed metal parts of the

situation.

power tool "live" and could give the operator an electric shock.

8. Safety notes for battery/charger.

a. Keep the charger away from rain or damp conditions. Water entering into

the charger will increase the risk of an electrical shock.

b. Only use chargers recommended by the manufacturer to recharge the

battery. There is a risk of fire if it is used with other batteries.

c. Never use to recharge third-party batteries. The charger is only designed

to charge the supplied batteries (Li-Ion) using the voltages specified in the

Technical Data. Otherwise there is a risk of fire or explosion.