Clarke CIR450B Betriebs- und Wartungsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Elektrowerkzeug Clarke CIR450B herunter. Clarke CIR450B 16 Seiten. Professional cordless impact wrench
Seite drucken
SAFETY PRECAUTIONS
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - do not let children handle the wrench.
4. DO NOT use in damp or wet conditions. Keep the work area well lit. Do not
use where a risk of fire or explosion is present.
5. Although the impact wrench may be used outdoors, DO NOT leave it
exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture
etc.
6. Always keep body and clothing dry. Never work in damp area without
adequate insulation against electric shock.
7. Do not fit the wrench to a stand or clamping device that may damage it.
GENERAL USE
1. This product vibrates during use. Vibration may be harmful to your hands
or arms. Stop using the machine if discomfort, a tingling feeling or pain
occurs and seek medical advice before resuming use.
2. ALWAYS use ear defenders.
3. ALWAYS stay alert and use common sense - do not use this product when
you are tired or under the influence of alcohol or medication.
4. ALWAYS ensure that the socket is correctly installed before switching on.
5. ALWAYS only use sockets which are specified for impact wrench use.
6. ALWAYS ensure the workpiece is firmly secured leaving both hands free to
control the impact wrench.
7. ALWAYS store this product in a dry, secure place out of reach of children
or untrained users.
8. ALWAYS keep all equipment dry especially the battery & battery charger.
9. ALWAYS keep metal objects such as coins, keys, nails or other small metal
objects which could make a connection from one terminal to another,
away from the battery cartridge. A short circuit across the terminals could
cause sparks, burns or start a fire.
10. ALWAYS ensure the machine has stopped before putting it down after use.
11. ALWAYS set the forward/reverse Switch-bar to neutral when changing bits
or when the machine is not required for immediate use. This will avoid
accidental starting.
4