Clarke CJS20Li Handbuch für Betrieb und Wartung - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Elektrowerkzeug Clarke CJS20Li herunter. Clarke CJS20Li 17 Seiten. 20v cordless jigsaw

LASER GUIDE

The laser guide helps keep the blade aligned with the cutting line.
1. Press the Laser on/off button to
turn the laser on.
• Do not point the laser beam at
people.
• Keep the laser beam below
eye level.
• Only turn on laser beam when
the tool is on the work piece.
2. Press the Laser on/off button
again to turn the laser off.

CUTTING TIPS

• Wait until the blade is running at full speed before attempting to cut
the workpiece.
• Do not put unnecessary pressure on the blade and avoid applying
lateral pressure.
• Take extra care when cutting curves - move the blade slowly to
avoid stress on the blade.
WOOD
• Check that any previously used timber being sawn does not contain
any nails or other metal objects which would damage the blade.
METAL
• Choose a suitable blade for cutting metal
• Lubricate the material and blade with cutting oil to prevent
overheating.
HOLE CUTTING
• When starting a cut from the center of a work piece, drill a 12mm
diameter hole to ensure that there is clearance for the blade
• Remember that the blade should emerge from the workpiece at
every point of the cut.
• When cutting tight curves, reduce the forward speed of the saw.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10