Clarke CPSB200 Handbuch für Betrieb und Wartung - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Elektrowerkzeug Clarke CPSB200 herunter. Clarke CPSB200 20 Seiten. Pressurised sandblaster

Seite drucken

TO STOP BLASTING

While continuing to press and hold

the Trigger, turn the abrasive

control valve to the closed

position, see Fig 13.

2. When you can see no abrasive is

coming out of the trigger, you can

stop the air flow by releasing the

trigger. By doing this you are

ensuring a clean and cog-free

manifold, hose, and trigger.

3. ALWAYS clean the gun thoroughly after use.

RELEASING PRESSURE FROM THE TANK

When you have finished blasting,

close the abrasive control valve,

see Fig 14.

2. Press and hold the trigger to expel

any remaining abrasive material

from the abrasive hose.

When you notice only air (no

abrasive) is coming out of the

trigger, release the trigger and

close the air supply valve, see Fig

15.

Ensure the throttle valve is open,

see Fig 16.

5. Press the trigger until air stops

flowing and the pressure gauge

reads "0".

6. Disconnect the air supply hose

from the supply valve.

Fig 13

Fig 14

Fig 16

Fig 15