Clarke CRT 40 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Clarke CRT 40 herunter. Clarke CRT 40 13 Seiten. 40-piece rotary tool kit
Auch für Clarke CRT 40: Gebrauchsanweisung (6 seiten)

Seite drucken

ASSEMBLING POLISHING BOB

• Screw the Bob on to the mandrel firmly, but do

not overdo it.

5. Assembling Abrasive Bands

• Slacken the screw on the end

of the mandrel and slide the

appropriate abrasive band on

to the rubber former, fully.

• Tighten the screw to secure

the band to the former.

ATTACHING THE FLEXIBLE DRIVE ASSEMBLY

• Unscrew and remove the Securing Ring (3) and

retain.

• Slacken the chuck using the spanner provided,

by pressing and holding the locking button (5).

• Slide the flexible drive through the chuck and

FULLY into the collet.

• Hold back the Securing Ring (3), whilst tightening

the chuck, thereby securing the flexible drive.

• Screw the Securing Ring (3) on to the end of the

tool, taking GREAT CARE to not to cross-thread it.

• At the opposite end of the Flexible Drive, insert

the mandrel of the tool to be used into the

chuck.

To undo the chuck, pull back on the sleeve in the

direction of the arrow and hold back to lock the drive

so that the spanner may be used.

Insert the mandrel fully, then re-tighten the

chuck.

Release the sleeve to release the drive.