Clarke Strong-arm AHP 16 Handbuch für Betrieb und Wartung - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Elektrowerkzeug Clarke Strong-arm AHP 16 herunter. Clarke Strong-arm AHP 16 13 Seiten. 15 tonne hydraulic press
Seite drucken
POSITIONING THE RAM
The ram can positioned as required
by sliding it along the top rail.
• Always position the ram directly
above the workpiece.
HYDRAULIC PUMP/RAM OPERATION
The pump is provided with two valves, operated by turning the respective
handwheel as shown.
Valve A is used for raising or lowering
the ram.
Turn the handwheel clockwise and
pump the handle to operate (or
lower) the ram. Turning the
handwheel anticlockwise releases
the pressure and the ram will rise.
Valve B is used to move the ram in
fast or slow mode.
Turn the handwheel clockwise and
pump the handle to move the ram quickly to the workpiece. Turning the
handwheel anticlockwise and pumping the handle moves the ram at a slower
rate.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5