Zanussi ZBB28651SA Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kühlschrank Zanussi ZBB28651SA herunter. Zanussi ZBB28651SA 16 Seiten. Refrigerator zanussi zbb28651sa
Auch für Zanussi ZBB28651SA: Benutzerhandbuch (48 seiten)

Seite drucken

G H

Connect the ap-

pliance laterally to

the kitchen furniture

sidewall:

1. Loosen the

screws of the

part (G) and

move the part

(G) till the furni-

ture sidewall.

2. Tighten the

screws of the

part (G) again.

3. Attach the part

(H) to the part

(G).

~50 mm

21 mm

~50 mm

21 mm

Install the part

(Ha) on the inner

side of the kitchen

furniture.

www.zanussi.com

Disconnect the

parts (Ha), (Hb), (Hc)

and (Hd).

Push the part

(Hc) on the part (Ha).

8 mm

Open the appli-

ance door and the

kitchen furniture door

at an angle of 90°.

Insert the small

square (Hb) into

guide (Ha).

Put together the ap-

pliance door and the

furniture door and

mark the holes.

Place the small

square on the guide

again and fix it with

the screws supplied.

Align the kitchen fur-

niture door and the

appliance door by

adjusting the part

(Hb).

Do a final check to make sure that:

• All screws are tightened.

• The magnetic sealing strip is attached tight-

ly to the cabinet.

Important! If the ambient temperature is low

(for example, in the Winter), the size of the

gasket decreases. The size of the gasket

increases when the ambient temperature

increases.

8 mm

Remove the

brackets and mark a

distance of 8 mm

from the outer edge

of the door where the

nail must be fitted

(K).

Press the part

(Hd) on the part

(Hb).