Zanussi ZBB5286 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kühlschrank Zanussi ZBB5286 herunter. Zanussi ZBB5286 16 Seiten.

Seite drucken

Disconnect the parts (Ha),

(Hb), (Hc) and (Hd).

8 mm

Remove the brackets and

mark a distance of 8 mm

from the outer edge of the

door where the nail must

be fitted (K).

Do a final check to make sure that:

• All screws are tightened.

• The magnetic sealing strip is attached tightly to the

cabinet.

Environmental concerns

The symbol

on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

ca. 50 mm

21 mm

ca. 50 mm

21 mm

Install the part (Ha) on the

inner side of the kitchen

furniture.

Place the small square on

the guide again and fix it

with the screws supplied.

Align the kitchen furniture

door and the appliance

door by adjusting the part

Hb.

90°

Push the part (Hc) on the

part (Ha).

Press the part (Hd) on the

part (Hb).

Important! If the ambient temperature is low (for example,

in the Winter), the size of the gasket decreases. The size of

the gasket increases when the ambient temperature

increases.

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please contact

your local council, your household waste disposal service

or the shop where you purchased the product.

8 mm

Open the appliance door and

the kitchen furniture door at

an angle of 90°.

Insert the small square (Hb)

into guide (Ha).

Put together the appliance

door and the furniture door

and mark the holes.