Clarke STRONG-ARM CSA4B Handbuch für Betrieb und Wartung - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Elektrowerkzeug Clarke STRONG-ARM CSA4B herunter. Clarke STRONG-ARM CSA4B 13 Seiten. 4 tonne hydraulic press
Seite drucken
ASSEMBLY
The following safety symbols are to be found on the machine.
Read this
instruction
booklet
before use.
Ensure the press and its components suffered no damage during transit and
that all components are present. Should any loss or damage become
apparent, please contact your CLARKE dealer immediately.
IMPORTANT: Due to the weight of the press components, we recommend
that you get assistance during assembly.
IMPORTANT: Do not locate your press where it will be open to the elements,
as severe weather conditions will damage the hydraulic parts.
1. Bolt the bottom cross members to
the side supports using the nuts,
bolts and washers.
2. Attach the feet to the side
supports using the nuts, bolts and
washers.
3. Bolt the upper crossmembers to
the side supports using the nuts,
bolts and washers.
• Assemble loosely before evenly
tightening all the bolts at each end
with both spring and flat washers.
4. Lift the frame assembly upright
and manoeuvre it to its intended
location in the workshop.
5. Bolt the ram baseplate to the
upper cross beams from below.
6. Insert the ram through the hole in the base plate from above and screw
into position.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Wear
protective
footwear
4
Wear eye
protection.