Zanussi ZD50/17RN Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kühlschrank Zanussi ZD50/17RN herunter. Zanussi ZD50/17RN 11 Seiten. Refrigerator-freezer zd50/17rn

Seite drucken

IMPORTANT SAFETY INFORMATION

It is most important that this instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred to another owner, or should you move house and

leave the appliance, always ensure that the book is left with the appliance in order that the new owner

can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of safety. You MUST read it carefully before installing

or using the appliance.

Installation

This appliance is heavy. Care should be taken

when moving it.

It is dangerous to alter the specifications or

attempt to modify this product in any way.

Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: if the supply cable is damaged, it

must be replaced by a supply cable available

from your local Service Force Centre.

Any electrical work required to install this

appliance should be carried out by a qualified

electrician or competent person.

Parts which heat up should not be exposed.

Whenever possible, the back of the appliance

should be close to a wall but leaving the required

distance for ventilation as stated in the installation

instructions.

The appliance should be left for 2 hours after

installation before it is turned on, in order to allow

the refrigerant to settle.

Child Safety

Do not allow children to tamper with the controls

or play with the product.

Keep all packaging well away from children.

During Use

This appliance is designed for domestic use only,

specifically for the storage of edible foodstuffs.

Frozen food must NOT be re-frozen once it has

thawed out.

Do not place carbonated or fizzy drinks in the

freezer.

Do not remove items from the freezer if your

hands are damp/wet, as this could cause skin

abrasions or frost/freezer burns.

Ice lollies can cause Ôfrost/freezer burnsÕ if

consumed straight from the freezer.

ManufacturersÕ storage recommendations should

be strictly adhered to. Refer to relevant

instructions.

The cooling plate or refrigerated freezer shelves

in this appliance contain channels through which

the refrigerant passes. If these are punctured this

will cause substantial damage to the appliance

and result in food loss. DO NOT USE SHARP

INSTRUMENTS to scrape off frost or ice. Under

NO circumstances should solid ice be forced off

the lining or shelves. Solid ice should be allowed

to thaw, when defrosting the appliance. See

Defrost Instructions.

Maintenance and Cleaning

Switch off and unplug the appliance before

carrying out any cleaning or maintenance work.

Servicing

This product should be serviced by an authorised

engineer and only genuine spare parts should be

used.

Under no circumstances should you attempt to

repair the machine yourself. Repairs carried out

by inexperienced persons may cause injury or

serious malfunctioning. Refer to your local

Zanussi Service Force Centre and always insist

on genuine spare parts.

At the end of the Appliance

Life

When disposing of your appliance, use an

authorised disposal site.

Remove the plug and ensure that any locks or

catches are removed, to prevent young children

being trapped inside.

Door reversal

1. Unplug the appliance from the power supply

before carrying out the below-mentioned

operations.

2. Remove the feet (3).

3. Unscrew the bottom hinge (1).

4. Remove the freezer door by releasing it from the

middle hinge (H).

5. Unscrew the middle hinge.

6. Remove the fridge door by releasing it from the

top hinge pin (G).

7. Remove the pin (G) from the top hinge, then

mount these on the opposite side.

8. Refit the fridge door, after having removed the

plugs(I) which must be refitted on the other side.

9. Replace the middle hinge to the left hand side.

10.Replace the freezer door.

11. Refit the bottom hinge (1) on the opposite side by

using the screws previously removed.

12.The doors can be aligned by adjusting the middle

hinge.

13.The middle hinge can be adjusted horizontally,

with the help of a tool, after having slackened the

two screws.

Important

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a lower setting.

Printed on recycled paper

D715 PIED/C