Zanussi ZFC 56 LAL Gebrauchsanweisung - Seite 13

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kühlschrank Zanussi ZFC 56 LAL herunter. Zanussi ZFC 56 LAL 16 Seiten. Refrigerator
Auch für Zanussi ZFC 56 LAL: Gebrauchsanweisung (16 seiten), Gebrauchsanweisung (16 seiten), Gebrauchsanweisung (16 seiten)

Seite drucken

MAINTENANCE AND CLEANING

Before any maintenance or cleaning work is

carried out, DISCONNECT the appliance from the

ELECTRICITY supply.

Internal cleaning

Clean the inside and accessories with warm water

and bicarbonate of soda (5ml to 0.5 litre of water).

Rinse and dry thoroughly.

NEVER USE DETERGENTS, ABRASIVE

POWDERS, HIGHLY PERFUMED CLEANING

PRODUCTS OR WAX POLISHES, TO CLEAN

THE INTERIOR AS THESE WILL DAMAGE THE

SURFACE AND LEAVE A STRONG SMELL.

Clean the drain hole of the water trough at regular

intervals and make sure that the drain hole is

never obstructed, so that the defrost water may

flow freely.

External cleaning

Wash the outer cabinet with warm soapy water. Do

NOT use abrasive products.

Once or twice a year dust the condenser (black

grill) and the compressor at the back of the

appliance, with a brush or vacuum cleaner, see

Fig. 8.

Fig. 8

CONDENSER

COMPRESSOR

You MUST ensure that the appliance is switched

OFF. An accumulation of dust will affect the

performance of the appliance and cause excessive

electricity consumption.

When the appliance is not in use

When the appliance is not in use for long periods,

disconnect from the electricity supply, empty all

foods and clean the appliance, leaving the door ajar

to prevent unpleasant smells.

Changing the light bulb

Should the interior light fail to work, first switch

off the appliance and disconnect from the

electricity supply, then replace the bulb as follows,

see Fig. 9.

Fig. 9

Unscrew the light cover and then pull it outward

toward the middle of the cabinet. Unscrew the

bulb and replace it with a new 15 watt bulb

(available from your nearest Zanussi Service

Centre).

Replace the light cover by sliding it into its

original position and replacing the screw.

138