Zanussi ZRA25600WA Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kühlschrank Zanussi ZRA25600WA herunter. Zanussi ZRA25600WA 24 Seiten.

Seite drucken

Replacing the bulb

If you want to replace the bulb, do these steps:

1. Break the circuit of the appliance.

2. Unscrew the lamp cover securing screw.

3. Unhook the moving part by pressing it as

shown in the figure.

4. Replace the bulb with one of the same

power and specifically designed for house-

hold appliances (the maximum power is

shown on the light bulb cover).

5. Fix the lamp cover in place.

6. Screw the lamp cover securing screw.

7. Reconnect the appliance.

8. Open the door and check if the light comes

on.

Technical data

Dimension

Voltage

Frequency

The technical information are situated in the rat-

ing plate on the internal left side of the appli-

ance and in the energy label.

Installation

Caution! Read the "Safety Information"

carefully for your safety and correct

operation of the appliance before installing the

appliance.

Positioning

This appliance should be installed in a dry, well

ventilated indoor where the ambient tempera-

ture corresponds to the climate class indicated

on the rating plate of the appliance:

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "In-

3. If necessary, replace the defective door

Height

Width

Depth

Climate

Some functional problems might occur for some

types of models when operating outside of that

range. The correct operation can only be guar-

anteed within the specified temperature range. If

you have any doubts regarding where to install

stallation".

gaskets. Contact the Service Center.

1250 mm

550 mm

612 mm

230 V

50 Hz

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C