Zanussi ZOB35302 Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen Zanussi ZOB35302 herunter. Zanussi ZOB35302 20 Seiten.
Auch für Zanussi ZOB35302: Benutzerhandbuch (20 seiten)

Seite drucken

First lift carefully and

then remove the

glass panel.

Clean the glass panel with water and soap. Dry

the glass panel carefully.

When the cleaning is completed, install the

glass panel and the oven door. Do the above

steps in the opposite sequence.

The screen-printing zone must face the inner

side of the door. Make sure that after the

installation the surface of the glass panel frame

on the screen-printing zones is not rough when

you touch it.

Make sure that you install the internal glass

panel in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem

The oven does not heat up.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

The back lamp

1. Turn the lamp glass cover counterclockwise

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

4. Install the glass cover.

The side lamp

1. Remove the left shelf support to get access

2. Use a narrow, blunt object (e.g. a teaspoon)

3. Clean the glass cover.

4. Replace the lamp with a suitable 300 °C

5. Install the glass cover.

6. Install the left shelf support.

Possible cause

The oven is deactivated.

WARNING!

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

CAUTION!

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

deactivate the circuit breaker.

to remove it.

heat-resistant lamp.

to the lamp.

to remove the glass cover.

heat-resistant lamp.

Activate the oven.

Remedy