Zanussi ZOS78964XU Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen Zanussi ZOS78964XU herunter. Zanussi ZOS78964XU 49 Seiten.

Seite drucken
When the function ends, a signal sounds.
The function stays on if you change the heating
function.
TIME EXTENSION
The function: Time Extension makes the heating
function continue after the end of Duration.
Not applicable to heating functions
with the core temperature sensor.

AUTOMATIC PROGRAMMES

WARNING! Refer to Safety chapters.
RECIPES ONLINE
You can find the recipes for the
automatic programmes specified for
this oven on our website. To find the
proper Recipe Book check the PNC
number on the rating plate on the front
frame of the oven cavity.

USING THE ACCESSORIES

WARNING! Refer to Safety chapters.
FOOD SENSOR
The food sensor measures temperature inside the
food. When the food is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
•
the oven temperature (minimum 120 °C),
•
the food core temperature.
CAUTION! Use only the food sensor
supplied and the original replacement
parts.
Directions for the best results:
•
Ingredients should be at room temperature.
•
Food sensor cannot be used for liquid dishes.
•
During cooking the food sensor must remain in
the dish and the plug in the socket.
•
Use recommended food core temperature
settings. Refer to "Hints and tips" chapter.
18
1. When the cooking time ends, a signal sounds.
Press any symbol.
The display shows the message.
2. Press
to turn on or
3. Set the length of the function.
4. Press
.
RECIPES WITH RECIPE AUTOMATIC
This oven has a set of recipes you can use. The
recipes are fixed and you cannot change them.
1. Turn on the oven.
2. Select the menu: Recipes. Press
confirm.
3. Select the category and dish. Press
confirm.
4. Select a recipe. Press
The appliance calculates an
approximate end of cooking time. It
depends on the quantity of food, the
set oven function and temperature.
Food categories: meat, poultry and fish
1. Activate the appliance.
2. Insert the tip of the food sensor into the centre
of meat or fish, in the thickest part if possible.
Make sure that at least 3/4 of the food sensor
is inside of the dish.
3. Put the plug of the food sensor into the socket
located in the front frame of the appliance.
to cancel.
to
to
to confirm.