Zanussi 192994960-00-202009 Benutzerhandbuch - Seite 21

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine Zanussi 192994960-00-202009 herunter. Zanussi 192994960-00-202009 24 Seiten. Zanussi washing machine user manual

Seite drucken

SHOWER

BATH

WASHING

MACHINE

RAINWATER

'RUN-OFF'

SURFACE WATER

DRAINS & SEWERS

UNTREATED

DISCHARGE

RIVER

Electrical connection

Any electrical work required to install this appliance

should be carried out by a qualified electrician or com-

petent person.

Warning! THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this

safety measure not be observed.

Before switching on, make sure the electricity supply

voltage is the same as that indicated on the appliance's

rating plate.

Warning! Information on the electrical connection

is given on the rating plate on the inner edge of the

appliance door.

The appliance is supplied with a 13 amp plug fitted.

In the event of having to change the fuse in the plug sup-

plied, a 13 amp ASTA approved (BS1363/A) fuse must be

used.

Should the plug need to be replaced for any reason, pro-

ceed as described below.

The wires in the mains lead are coloured in accordance

with the following code:

Environment concerns

The symbol

on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

SINK TOILET

BIDET

DISHWASHER

FOUL DRAIN

FOUL SEWERS

SEWAGE TREATMENT

WORKS

TREATED DISCHARGE

RIVER

The wire coloured green and yellow must be connected

to the terminal marked with the letter «E» or by the earth

symbol

or coloured green and yellow.

The wire coloured blue must be connected to the terminal

«N» or coloured black.

The wire coloured brown must be connected to the ter-

minal marked «L» or coloured red.

Upon completion there must be no cut, or stray strands

of wire present and the cord clamp must be secure over

the outer sheath.

Warning! A cut off plug inserted into a 13 amp

socket is a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of safely. Should

the appliance power supply cable need to be replaced,

this must be carried out by our Service Force Centre. The

appliance should not be connected to the electrical supply

by means of an extension cable.

Note!

When the appliance is installed the power supply cable

must be accessible.

Permanent connection

In the case of permanent connection it is necessary that

you install a double pole switch between the appliance

and the electricity supply (mains), with a minimum gap

of 3 mm between the switch contacts and of a type suitable

for the required load in compliance with the current elec-

trical regulations.

The switch must not break the yellow and green earth

cable at any point.

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

Green & Yellow

Brown

Cord clamp

Blue