Zanussi FE 1026 N Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Zanussi FE 1026 N herunter. Zanussi FE 1026 N 23 Seiten. Washing machine fe 1026 n
Use
Control panel
1 ON/OFF button
Press this button to switch the washing machine on.
Press the ON/OFF button again to switch the
machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It
lights up when you press the button, and goes out
when you press it again.
3 FABRIC button
Press this button repeatedly to select the
programme on the basis of the type of laundry to be
washed. The light relevant to the selected
programme will light up. The washing machine will
propose a temperature and automatically select the
maximum spin value provided for the programme
you have chosen. You can change these values by
operating buttons 4 and 5.
Hand wash
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be
hand-washed
.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine. The relevant
light will light up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (HAND WASH programme).
Position
corresponds to cold wash.
Important!
By depressing TEMPERATURE
SPEED
buttons simultaneously, the acoustic
signal is switched off in the following cases:
• when depressing the buttons
• when an incorrect option selection is made
• at the end of the programme.
5 SPIN SPEED button
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
• for cotton: 1000 rpm;
• for synthetic fabrics, wool, and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
At the end of the cycle, the light of the
START/PAUSE button
locked, the
pilot light remains lit, to indicate that
the water must be drained.
To complete the cycle, choose one of the following
options:
8
and SPIN
: when you choose this
goes out and the door is