Zanussi FJS 1225 W Gebrauchsanweisung - Seite 20

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Zanussi FJS 1225 W herunter. Zanussi FJS 1225 W 29 Seiten. Front-load washer

Seite drucken

Symptom

The machine vibrates when spinning

The door will not open

Spinning starts late or the machine

does not spin

The machine makes an unusual

noise

No water is visible in the drum

Service & Spare Parts

In the event of your appliance requiring service, or if

you wish to purchase spare parts, please contact your

local Zanussi Service Force Centre by telephoning:

0870 5 929929

Your telephone call will be automatically routed to the

Service Force Centre covering your post code area.

The addresses are listed on the following pages.

Before calling out an engineer, please ensure you have

read the details under the heading "Something Not

Working".

When you contact the Service Force Centre you will

need to give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of fault

4. The model and serial number of the appliance (found

on the rating plate - see picture).

5. The purchase date

Possible causes

The internal packing has not been removed.

The machine is in contact with the wall or furniture.

The machine is not level and stable (check diagonally).

The washing load is badly distributed in the drum.

Maybe there is very little laundry in the drum.

The water level is above the bottom edge of the door.

The machine is heating the water.

The drum is turning.

The door can only be opened when the relevant light has gone out.

The electronic unbalance detection device has cut in because the laundry

is not evenly distributed in the drum. The laundry is redistributed by

reverse rotation of the drum. This may happen several times before the

unbalance disappears and normal spinning can resume. If, after 15

minutes, the laundry is still not evenly distributed in the drum, the

machine will not spin. In this case, redistribute the load manually and

select the spin programme.

The machine is fitted with a type of motor which makes an unusual

noise compared with other traditional motors. This new motor ensures

a softer start and more even distribution of the laundry in the drum

when spinning, as well as increased stability of the machine.

Machines based on modern technology operate very economically

using very little water without affecting performance.

Customer Care

For general enquiries concerning your Zanussi appliance

or for further information on Zanussi products, please

contact our Customer Care Department by letter or

telephone as follows:

Customer Care Department

Zanussi

55-77 High Street

Slough

Berkshire

SL1 1DZ

Tel 08705 727727*

or visit our website at www.zanussi.co.uk

* calls to this number may be recorded for training

purposes.