Zanussi DE 6854 Gebrauchsanweisung - Seite 5
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Geschirrspüler Zanussi DE 6854 herunter. Zanussi DE 6854 20 Seiten. Dishwasher
Auch für Zanussi DE 6854: Gebrauchsanweisung (20 seiten), Gebrauchsanweisung (20 seiten)
Seite drucken
Before use
Before using your dishwasher for the
first time:
1. Ensure that the electrical and water connections comply
with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill
with salt
5. Fill the rinse aid dispenser
6. Run a Rinse and Hold programme.
Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and PPM (parts per Million).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The dishwasher is factory set at level 3.
If this level is not suitable for your area the softener should be
adjusted.
Water hardness
Clarke
French
Level
degrees
degrees
< 6
1
2
6 - 21
8 - 30
22 - 35
3
31 - 50
36 - 49
4
51 - 70
50 - 63
5
71 - 90
If your water is level 1 it is already soft and therefore there
is no need to use salt.
With the setting of the water softener at level 1 the salt
indicator light on the control panel will always remain off.
Use salt from level 2 upwards.
From level 2 upwards, if salt refilling is necessary, the salt
indicator light will illuminate only in setting mode and at
the end of the washing programme.
During the run of the programme it will remain off.
PPM
Use of
(Parts per
(°TH)
Million)
< 80
< 8
81 - 300
301 - 500
501 - 700
701 - 900
To select a different level ensure that the
dishwasher is off and then proceed as
follows:
1. Press INTENSIVE SID 80
buttons simultaneously.
2. While keeping the programme push buttons INTENSIVE
SID 80
I
and NORMAL pressed switch on the dishwasher by
pressing the ON-OFF push button.
The ON-OFF indicator light comes on.
At the same time, the indicator lights of the INTENSIVE SID
80
I
and NORMAL push buttons start flashing.
SO515
3. Press the INTENSIVE SID 80
light of the NORMAL push button turns off, while the
indicator light of the INTENSIVE SID 80
remains fixed for about 5 seconds, after this it starts flashing
indicating the current level of the water softener.
salt
NO
YES
YES
YES
SO516
YES
The current level is indicated by the number of flashes
made by the INTENSIVE SID 80
alternates 5 seconds off with a number of flashes, this for
about 60 seconds.
Example:
1 flash
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
4. To change the level, press the INTENSIVE SID 80
programme push button. Each time the push button is
pressed the level changes.
Example:
if the current level is 3, by pressing the INTENSIVE SID 80
programme push button once, level 4 is selected.
if the current level is 5, by pressing the INTENSIVE SID 80
programme push button once, level 1 is selected.
The INTENSIVE SID 80
about 5 seconds after which it starts flashing indicating the
new level selected.
5. To memorise the new level, switch off the dishwasher by
pressing the ON-OFF push button.
5
I
and NORMAL programme push
I
push button, the indicator
indicator light, that
I
= level 1
I
indicator light remains off for
I
push button
I
I
I