Zanussi ZDT41 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geschirrspüler Zanussi ZDT41 herunter. Zanussi ZDT41 16 Seiten.

Zanussi ZDT41 Benutzerhandbuch

Setting mode

The appliance is in setting mode when all the programme
indicator lights are off and the end indicator light flashes.
The appliance must be in setting mode for these opera-
tions:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the audible signals.
If a programme indicator light is on, cancel the pro-
gramme to go back to the setting mode. Refer to the
chapter "Setting and starting a washing programme".
Programme indicator lights A and B
Apart the selection of the corresponding washing pro-
gramme, these lights have an auxiliary functions:
• The adjustment of the water softener level.
• Deactivation/activation of the audible signals.
Audible signals
You can hear an audible signal:
• At the end of the washing programme.
• When the appliance has a malfunction.

Washing programmes

Washing programmes
Programme
1)
2)
4
Degree of soil
Type of load
Crockery, cutlery,
Normal soil
pots and pans
Normal or light
Crockery and cut-
soil
Crockery and cut-
Normal soil
The activation of the audible signals is set at the factory.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the programme selection/cancel but-
ton until programme indicator light A flashes and
programme indicator light B comes on.
4. Press the programme selection/cancel button again.
– Programme indicator light A comes on.
– Programme indicator light B starts to flash.
5. Wait until programme indicator light A goes off.
– Programme indicator light B continues to flash.
– The end indicator light comes on.
The audible signals are activated.
6. Press the programme selection/cancel button again.
– The end indicator light goes off.
The audible signals are deactivated.
7. Switch off the appliance to save the operation.
Do these steps to activate the audible signals:
1. Do the above procedure until the end indicator light
comes on.
Prewash
Main wash up to 65°C
2 intermediate rinses
Final rinse
Drying
Main wash up to 65°C
lery
Final rinse
Prewash
Main wash up to 50°C
1 intermediate rinse
lery
Final rinse
Drying
Programme description